"Auto Sequential Mode" - PEUGEOT 308 2008 Owner's Manual

Sequential mode
When the vehicle has moved off,
select position M to change to
sequential mode.
AUTO disappears and the
gears engaged appear in suc-
cession on the
panel display.
The gear change requests are only car-
ried out if the engine speed permits.
It is not necessary to release the accel-
erator during gear changes.
When braking or slowing down, the
permit reacceleration of the vehicle in
the correct gear.
i
At very low speed, if reverse gear
is requested, this will only be taken
into account when the vehicle is
immobilised. The Foot on brake
strument panel to prompt you to
brake.
At high speed, if reverse gear is
requested, the N indicator light will
to neutral automatically. To engage
a gear again, return the lever to po-
sition A or M .
!
will not change up unless the driver
acts on the gear lever or the steer-
ing wheel controls.
Never select neutral N while the
instrument
vehicle is moving.
Only engage reverse gear R when
the vehicle is immobilised with the
brake pedal pressed.
Automatic mode
Following use of the sequential
mode, select position A to return to
the automatic mode.
AUTO and the gear engaged
appear on the instrument panel
display.
active mode, without any action on the
part of the driver. It continuously selects
the most suitable gear in relation to the
following parameters:
- style of driving,
DRIVING
i
ple when overtaking another vehicle,
past the point of resistance.

"Auto sequential mode"

This mode enables you to overtake, for
while using the functions of the sequen-
tial mode.
Activate steering wheel
position + or - .
ed if the engine speed permits. AUTO is
still displayed on the instrument panel.
After a few moments without any action
automatic control of the gears.
control
141