Table of Contents
Advertisement
1. After removing the flexible tube, open the front cover .
2. Rotate the support of the bag to the correct position.
3. Remove the dust bag from the Bag Support.
4. Replace the paper bag when it is full of dirt and put in a new one.
5. Close the cover by passing down until it is locked.
2.Spilling rubbish from the dust cup
Always operate the cleaner with the dust compartment subassembly
whole installed.
If you forget to attach HEPA and filter or attach its in the wrong manner, the
dust compartment subassembly may not rinse.
① After removing the flexible tube, open the front cover
and raise the dust cup's handle.
② Take out the dust cup.
③ Press the lock of dust cup .
④ Carry away the dust cap and Spill rubbish.
⑤ Replace the dust compartment subassembly until it is locked.
8
Advertisement
Table of Contents
