Page 1
HEDGE TRIMMER ATTACHMENT to LK PBT3446 AUTO MULTITOOLS BRUSH CUTTER (Model PBT3446TP) Translation of the original instructions for use WARNING: Read the instructions before using the product Before initial start-up, please read through these operating instructions carefully prior to using the machine. Keep the instructions safe and pass them on to any subsequent user so that the information is always available.
Page 6
B = 90° Fig. 13 A = 0° Fig. 14 A = 0° Fig. 15 C = 180°...
Page 7
HEDGE TRIMMER INSTRUCTIONS MANUAL Thank you for choosing one of our garden This hedge trimmer attachment products. can ONLY be fitted on brush This hedge trimmer attachment has been cutter model PBT3446 manufactured in accordance with current safety MULTITOOLS and used with it. regulations in order to protect the consumer.
Page 8
HEDGE TRIMMER INSTRUCTIONS MANUAL A8 – Do not touch the blades when B8 – Prolonged use of the hedge the engine is on. Switch the engine trimmer hinder blood off before touching the blades, even circulation to the hands (Raynaud’s when have remove...
Page 9
HEDGE TRIMMER INSTRUCTIONS MANUAL 4. ASSEMBLY B10 – SAFETY DEVICES B10.1 – The THROTTLE TRIGGER LOCKOUT (refer to Brushcutter 1) The packaging box contains the gearbox and manual) stops accidental operation the blades, separated from the shaft (see fig. 2) of the throttle control lever.
Page 10
HEDGE TRIMMER INSTRUCTIONS MANUAL WORKING ANGLE ADJUSTMENT 1) Slacken the knob (3) on the clamp (1) located on the motorized unit. 2) Move closer and introduce the shaft (2) in the The blades may be adjusted in 8 different clamp, making sure the flexible peg (5) matches positions;...
HEDGE TRIMMER INSTRUCTIONS MANUAL 6. STARTING AND STOPPING WARNING – DANGER!! If the engine starts and stays in the half acceleration position, the blades are WARNING! Do not start the engine moving. Let the engine turn for a without first fitting the hedge few seconds to make sure it warms up.
HEDGE TRIMMER INSTRUCTIONS MANUAL 7. OPERATION HIGH HORIZONTAL CUT (or hedge top): adjust the hedge trimmer operating angle as shown in fig. 15 to cut the top of a high HOW TO USE THE HEDGE TRIMMER hedge. 1) Hook the belt sling (fig. 11 item 1) onto the ring (fig.
Page 13
HEDGE TRIMMER OPERATING MANUAL TRANSPORT During transport (even for short distances) the blade guards must be fitted (pict. 12). ALWAYS USE GLOVES WHEN FITTING OR REMOVING THE BLADE GUARDS. STORAGE # Clean the hedge trimmer. # If the trimmer is not used for over 2 months, empty the fuel tank.
HEDGE TRIMMER INSTRUCTIONS MANUAL TECHNICAL DATA Sound power level 108 dB(A) SWL av (ISO 11094) Hedge trimmer attachment weight 2.1 Kg Maximum vibration level Hedge trimmer + brushcutter 7.7 m/s (EN 28662/1) 7.7 Kg LK PBT3446 AUTO weight 38 cm Cutting device (blades) Incertitude value of Sound pressure level...
Need help?
Do you have a question about the PBT3446TP and is the answer not in the manual?
Questions and answers