Before installation, please be sure to read this quick installation guide and user’s manual carefully to complete machine installation. System Requirements Multi-Profile CMOS IR Network Camera Network Environment LAN Model WLAN Model Network Interface 10/100MBase-TX Ethernet 802.11b/g WLAN (SMA antenna) Monitoring System Recommended for Internet Explorer 6.0 or later System Hardware ·...
Page 3
The LED is defined to identify LAN/WLAN connection type. When LAN port is connected, the LED will be green. For WLAN model, if LAN ported is connected, the LED will be green; if LAN cable is removed; the IP cam will change to WLAN connection and LED change to orange color.
Page 4
bottom and then plug into AC power socket. Camera administration 1. PC Viewer The Network Camera provides GUI (Web based, Graphical User Interface) for machine management and monitoring. PC viewer supports Microsoft internet Explorer 6.0 or later with Java support 2.
Page 5
assign 192.168.0.100. User may now open your web browser, and key in http://192.168.0.100 in the address bar of you web browser to logon Network Camera’s web configuration page. Note 2: If you want to enable WLAN connection, please refer to user’s manual inside CD, the section “Setting/Network”.
Page 6
Mobile Phone Dialing procedure: Step 1: Contact your cell phone provider and make sure that 3GPP service is available. Support cell phone list please keep contact with your Network Camera sales. Step 2: Enable “internet access” function on your mobile phone. Some telecom will automatically download the setup profile to your mobile phone;...
Need help?
Do you have a question about the WLAN MODEL and is the answer not in the manual?
Questions and answers