Rapid Fire - XMOD 30 MODE PLUS User Manual

XMOD Modded Controller

RAPID FIRE

This controller comes by default with 5 pre-programmed speeds.
Every speed is adjustable. This allows versatility across shooters and also with future games.
Each game, and sometimes each weapon within each game, require a different and specific speed
setting to achieve the proper firing rate.
Although this chip is very fast, you are still limited by how fast the game allows a weapon to shoot.
Shooting speed in some games are also limited in game by the weapon's rate of fire and animations.
You can slow down full automatic weapons to pinpoint precision or even speed single shot
weapons.
In some Call of Duty games you must set the fire rate just below the allowed limit for some weap-
ons, otherwise, if your fire speed is too fast for the game, your weapon will be blocked
Changing Rapid Fire speeds:
This XMOD Controller has 5 different modes/speeds which are all Programmable. The default speeds
for each mode are listed below.
To switch/cycle speeds:
■ Forward: Hold the A button and tap the Mode button.
■ Backward: Hold the B button and tap the mode button.
You will see the LEDs flash indicating the mode/speed you are current in.
The controller will always
remember the last mode you were
using before powering down.
By Default, at startup all modchip
Special functions and Rapid Fire
will be OFF.
MASTER RESET TO FACTORY DEFAULT
● Turn the XBOX ONE Controller OFF.
● Press & Hold the MODE button.
● While holding it, turn the XBOX ONE Controller ON.
● The LEDs will flash for 5 seconds.
All settings will be restored to default values.
XBOX ONE 30 PLUS
Mode
Button
FACTORY DEFAULT
SPEEDS
Speed 1:
Speed 2: 10 sps.
Speed 3: 15 sps.
Speed 4: 20 sps.
Speed 5: 30 sps.
Switch
Backward
Switch
Forward
8 sps.