XMOD 30 MODE PLUS User Manual page 2

XMOD Modded Controller
Turn on your wireless controller and the console
▪ Press the Xbox button on the wireless controller to turn on both the controller and the
console.
▪ Open the battery door of the Xbox One wireless controller.
▪ Insert batteries to align with the polarity as indicated inside the battery compartment.
▪ Reinsert the battery door.
Enroll the controller using the console's connect button
▪ Power on your Xbox One console.
▪ Insert AA batteries (or rechargeable batteries from the Xbox One Play & Charge Kit) into the
controller.
▪ Turn on your controller by pressing and holding the Xbox button until the controller turns on.
▪ The Xbox button will pulse, indicating it's not yet connected to a controller. If the Xbox
button is lit solid, then the controller is already connected.
Your controller is now connected to your console. Repeat this procedure for every extra controller you want
to add.
STARTUP: By default, the Rapid Fire mod is
XBOX ONE 30 PLUS
turned OFF at startup