X4-TECH CLIPSTAR Instruction Manual page 26

AVI is one of the most popular video formats supported by portable media players right now
and is one of the most popular formats on the Internet. Video files with XviD/DivX are high
in quality and small in size and the effect is no different than WMV or RMVB video files.
You can convert AVI, MPG, MPEG, RM, RMVB, WMV and DAT formats into an AVI format.
System requirement:
Minimum requirements for PC configuration:
CPU：Intel or AMD core, Intel Pentium 3 or above，including Intel Celeron series.
Installation setup:
1) Insert the enclosed CD ROM and then click on install AVConverter V1.0. This software can
be found in the /AVIConverter folder.
2) Open the toolbox after installation. The following menu will be displayed:
AVI is one of the most popular video formats supported by portable media players right now
and is one of the most popular formats on the Internet. Video files with XviD/DivX are high
in quality and small in size and the effect is no different than WMV or RMVB video files.
You can convert AVI, MPG, MPEG, RM, RMVB, WMV and DAT formats into an AVI format.
System requirement:
Minimum requirements for PC configuration:
CPU：Intel or AMD core, Intel Pentium 3 or above，including Intel Celeron series.
Installation setup:
1) Insert the enclosed CD ROM and then click on install AVConverter V1.0. This software can
be found in the /AVIConverter folder.
3) Select the file to be converted as shown in the picture below:
2) Open the toolbox after installation. The following menu will be displayed:
› In the selection field „Resolution" the resolution must be
set to 160 x 128 pixels.
› Select the file to be converted as shown in the picture
below:
Select a target file path by clicking on the key to the right of the target file.
Select the conversion quality and aspect ratio.
3) Select the file to be converted as shown in the picture below:
After parameters have been set，click on "Save" and continue to add converted files or press
the "End" key to return to the previous interface.
Press "Convert Now" to start converting.
Select a target file path by clicking on the key to the right of the target file.
Select the conversion quality and aspect ratio.
After parameters have been set，click on "Save" and continue to add converted files or press
the "End" key to return to the previous interface.
Press "Convert Now" to start converting.
0
Chapter 14 Converting a video file
Select a target file path by clicking on the key to the right
of the target file.
Select the conversion quality and aspect ratio.
After parameters have been set,click on „Save" and conti-
nue to add converted files or press the „End" key to return
to the previous interface.
Press „ Convert Now" to start converting.
When the conversion progress reaches 100 % and has been
completed, then the file will be successfully converted.
Copy the converted file to the device, by connecting the
USB cable to the device to transfer files to the portable me-
dia player that you will now be able to watch.
Chapter 14 Converting a video file
1