Table of Contents
Advertisement
15 seconds, 20 seconds, 30 seconds, Always On.
› Lum
There are 5 levels to choose from: 1, 2, 3, 4 and › The higher
the level, the darker the display will be.
› Backlight mode
Choose one of the two settings: Normal and Power Save.
. System setting
Select one of the 3 options: About, Upgrade and Default.
› About
Press the „ M" key and the following information will be dis-
played:
› Version
› Date
› Flash memory
› Card memory
This is a read-only file. Press the „ M" button to exit.
› Firmware upgrade
After this option has been selected a dialog box will appear
on display. Press the „:" or „9 " button to select „Yes" or
Chapter 13 Settings
„Cancel" and the „M" button to confirm. Once the player
has been connected to your PC via USB cable, the system
will enter a firmware upgrading mode.
› Default
After this option has been selected a dialog box with the
message „ Restorable" will appear on display. Press the „ :"
or „ 9 " button to select „ Yes" and the „ M" button to confirm
and return the player to a factory default setting.
Please note
Selecting „YES" will delete all previous settings and restore
the player to a factory default setting.
. Power off time
This option adjusts the time after which the player will
automatically shut off, after not being in use for a certain
amount of time.
Choose one of the 6 different settings: OFF, 10 minutes, 15
minutes, 30 minutes, 60 minutes and 120 minutes. If „OFF"
has been selected, then the player will not turn itself off
independently.
Chapter 13 Settings
Advertisement
Table of Contents
