Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Eurotops N0E-13ET-100
Summary of Contents for Eurotops N0E-13ET-100
- Page 1 CORDLESS WEED SWEEPER Cat. No.: 25281(Model.: N0E-13ET-100) INSTRUCTION MANUAL WARNING: READ THIS MANUAL BEFORE USING！ For your safety and for proper operation and maintenance, Please read carefully and keep readily available for future reference...
-
Page 2: Extent Of Delivery
1. INSTRUCTION: This device is designed to remove dusts and weeds from between paving stones and slabs. It is not intended for use on sensitive surfaces like tiles. It is to be used only for its prescribed purpose, not for use in commercial, trade or industrial applications. -
Page 3: Description Of The Device
1. Switch 1& 2 5. Wheel 2. Lock button 6. Guard hood 3. Handle assembly 7. Sweeper 4. Lock-off button 4. TECHNIAL DATA Model N0E-13ET-100 (Cat.No.: 25281) Voltage 7.2VDC No Load Speed 1200 /min Max. brush diameter 100mm Battery type Lithium-ion Battery capacity 1.3Ah... -
Page 4: Explanation Of Symbols
5. EXPLANATION OF SYMBOLS Carefully read operator’s manual before handling the machine Observe instructions and safety rules when operating. Shut off engine and remove power cord before performing cleaning and maintenance. Danger – objects may be thrown out at high speed when motor is running. -
Page 5: General Safety Instructions
6. GENERAL SAFETY INSTRUCTIONS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or Battery-operated power tool. - Page 6 b) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
-
Page 7: Battery Charging
5) Battery tool use and care a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. b) Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire. -
Page 8: Important Charging Notes
The charger is consisted of the adaptor (6) and the charging base (5) ‘ 1) Plug cord from the adaptor (6) into charging base (5). (IMPORTANT: do not use any other charger, only use the charger comes with the product) 2) Plug the adaptor into an outlet. - Page 9 5) The battery pack need to be charged before first using and should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE using this product with its battery pack in a depleted condition. (NOTE: After several charge and discharge cycles, the battery will attain full capacity.) 6) To prolong battery life, avoid leaving the battery pack on charger for extended periods of time (over 30 days without use).
- Page 10 Charger Charger’s plug must match the outlet. Never modify the plug in any way. Unmodified plugs and matching outlets will reduce risk of electric shock. Use your charger only to charge batteries of the type supplied with your tool. Other batteries could burst, causing personal injury and damage. Only 2 battery packs is allowed to be charged continuously in order to prevent overheating of charger, necessary rest time is required to let the charger cool down before further charging.
-
Page 11: Operation
- Fit the brush (A) onto the drive axle (B), make sure that the brush fits accurately into the mount (C) (Fig. 6) - Fixed the shaft to fasten the steel/Nylon brush (8/9): insert the pin (14) into the recess on the shaft and hold with one hand, use the open-ended wrench (13) to fix the brush with the nut (12) (Fig.7) Important Be sure to remove the pin again from the shaft. - Page 12 Open the lock button (3), use one hand to hold the tube (5). the other hand to hold the handle (4) to pull out Pull out to your desired height, then press the lock button to lock it. Warning: Do not turn on the switch (1,2)when you adjust the handle. This can cause a serious injury.
- Page 13 3) ON/OFF switch Press and hold Switch 1 first, and then press Switch 2 Press and hold Switch 2, then release Switch 1 but continue to squeeze switch 1 for continued operation. Release switch 2 to stop the machine. Important Always carry out a short trial run to check out possible effects on the surfaces of the paving stones or slabs before starting with your work.
- Page 14 01 . 230 60 43 12 or info@eurotops.at in Switzerland 044 . 28 36 125 or info@eurotops.ch in the Netherlands 026 . 37 36 333 or info@eurotops.nl in France 0892 . 700 470** or info@eurotops.fr * 14 Cents/minute via German landline, max. 42 cents/minute via mobile phone network...
Need help?
Do you have a question about the N0E-13ET-100 and is the answer not in the manual?
Questions and answers