Panasonic DMP-BD80 Operating Instructions Manual page 10

F Connecting to 5.1ch AUDIO OUT terminal [BD80]
When connected to a compatible amplifier/receiver using the 5.1ch AUDIO OUT terminals, you can enjoy surround sound.

Back of the unit
Cable connections
a Front speaker (L/R)
b Surround speaker (L/R)
G Connecting to DIGITAL AUDIO OUT terminal
You can enjoy surround sound, when connected to an amplifier/receiver using the COAXIAL ([BD80]) or OPTICAL terminal.
With COAXIAL ([BD80]) or OPTICAL
Coaxial cable
Back of the unit
Optical digital audio cable
Connecting AC mains lead
Back of the unit
RQT9401
10
Multi channel speakers



Amplifier/receiver
c Center speaker
d Subwoofer
COAXIAL IN
Amplifier/receiver
OPTICAL IN
Cooling fan
AC mains lead (included)
To a household mains socket
(AC 220 to 240 V, 50 Hz)
NECESSARY SETTINGS
≥"Analog Audio Output": "2ch (Downmix) +
NOTE
≥7.1 channel disc is mixed down to 5.1
Connect Audio
≥Enjoying High Bit rate Audio with 7.1ch
cables to
terminals
When connecting amplifier/receiver or
corresponding to
other devices with HDMI AV OUT terminal
the speakers you
≥"HDMI Audio Output" : "Off" (
have connected.
When connecting a television with HDMI
AV OUT terminal (
≥"HDMI Audio Output" : "Off" (
≥Depending on how the disc was recorded,
NECESSARY SETTINGS
≥"Digital Audio Output" : Depending on the
NOTE
When connecting a television with HDMI
AV OUT terminal (
≥"HDMI Audio Output" : "Off" (
Connect only after all other connections
are complete.
NOTE
Conserving power
This unit consumes a small amount of power
even when it is turned off ("Quick Start": "Off",
TIPS
less than 0.5 W). To save power when the
unit is not to be used for a long time, unplug it
from the household mains socket.
5.1ch" ( 31)
channel audio.
speaker and 5.1ch speaker ( 20)
31)
(Otherwise, depending on the
specifications of connected devices, the
audio from AUDIO OUT terminal may be
output as two channels only.)
8, A).
31)
(Otherwise, the sound may not be output
with the desired audio.)
the audio may not be output properly on
the number of channels desired.
connected amplifier/receiver (
8, A).
31)
(Otherwise, the sound may not be output
with the desired audio.)
30)