Glass Parts; Operational Warnings; Potentially Explosive Areas - Motorola razr hd User Manual

Glass parts

Some parts of your mobile device may be made of glass. This glass could break if the product
Glass parts
receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using
your mobile device until the glass is replaced by a qualified service centre.

Operational warnings

Obey all posted signs when using mobile devices in public areas.
Operational warnings

Potentially explosive areas

Potentially explosive areas are often, but not always, posted and can include blasting areas,
fuelling stations, fuelling areas (such as below decks on boats), fuel or chemical transfer or
storage facilities or areas where the air contains chemicals or particles, such as grain dust or
metal powders.
When you are in such an area, turn off your mobile device and do not remove, install or
charge batteries, unless it is a radio product type especially qualified for use in such areas
and certified as "Intrinsically safe" (for example, Factory Mutual, CSA or UL approved). In
such areas, sparks can occur and cause an explosion or fire.
Symbol key
Your battery, charger or mobile device may contain symbols, defined as follows:
Symbol Definition
Important safety information follows.
032374o
Do not dispose of your battery or mobile device in a fire.
032376o
Your battery or mobile device may require recycling in
accordance with local laws. Contact your local regulatory
032375o
authorities for more information.
Do not dispose of your battery or mobile device with your
household waste. See "Recycling" for more information.
Symbol Definition
Do not use tools.
For indoor use only.
Listening at full volume to music or voice through a headset
may damage your hearing.
Radio frequency (RF) energy
RF Energy
Exposure to RF energy
Your mobile device contains a transmitter and receiver. When it is ON, it receives and
transmits RF energy. When you communicate using your mobile device, the system handling
your call controls the power level at which your mobile device transmits.
Your mobile device is designed to comply with local regulatory requirements in your country
concerning exposure of human beings to RF energy.
RF energy operational precautions
For optimum mobile device performance and to be sure that human exposure to RF energy
does not exceed the guidelines set forth in the relevant standards, always follow these
instructions and precautions:
• When placing or receiving a phone call, hold your mobile device just like you would a
landline phone.
• if you wear the mobile device on your body, ensure that the device is positioned at least
2.5 cm (1 inch) away from the body and if you use an accessory case or holder, ensure it is
free of any metal.
RF energy interference/compatibility
Nearly every electronic device is subject to RF energy interference from external sources if
inadequately shielded, designed or otherwise configured for RF energy compatibility. In some
circumstances, your mobile device may cause interference with other devices.
Product Safety & Legal 57