Page 2
FEATURES Metallic headband inner structure. Premium comfort. 5.1 real sound. Ozone atmosphere. Detachable LED microphone. Advanced in-line control. Driver compatible with Windows. CONTENT Headphone with mic + inline controller with a USB connector. Magnetic controller base.
(Independent channel volume sliders)(This sliders only will work if the sounds you are playing are in independent channels). Once the installation have been finished, open the Rage Z90 software and configure the device to suit your playback and recording preferences.
Page 4
rage mic plug & unplug * Plug & Unplug instructions: * LED indicator on microphone: Insert the mic connector into the headset paying attention to the shape of LED off when MIC MUTED the case and plug it. Once plugged turn the mic 90º to avoid detach it by error.
COnfiguratiOn 1. VOLUME CONTROL In the tray, click OZONE logo to pop-up the Rage Z90 Control Panel Adjust the master and front volume with the sliders, you can mute or lock L and R channels clicking in the icons.
2. speaker settings 3. SAMPLE RATE Choose the speaker configuration between stereo, quadraphonic or 5.1 real Choose the sample rate quality, you can choose between 44.1 KHz or 48 surround KHz sample rates.
Page 7
4. EQUALIZER 5. envirONMENTS EFFECTS Choose the eq preset that suits more your gaming style or create a new one If you enable the the environment effects, you could set up the room size or and store it in the manual input box. pick an environment to change the acoustic of the sounds played.
6. 7.1 virtual speaker shifter 7. flex bass Turn on the 7.1 virtual speaker shifter feature by clicking on the box and move You can turn on the Flex bass feature clicking on the box and adjust the bass the sliders to configure the volume of each channel or simply move and level and the the cut off frequency with the sliders.
8. audiO enhance 9. dynamic bass Audio enhance is a sound corrector, turning it on will adjust your playback You can turn on the dynamic bass feature clicking on the box and adjust the to give you a better sound experience correcting extremely high or low bass level and the the cut off frequency with the sliders.
Page 10
10. vOLUME NORMALIZATION 11. vOICE DEFINITION You can turn on the voice normalization feature clicking in the box and move You can turn on the surround max feature clicking in the box and adjust the the slider to set the level and choose the the mode in the drop menu. sliders to get a clearer voice from others and supress the incoming noise in the communications.
Page 11
12. surrOUND enhance micrOphOne settings: You can turn on the surround enhance feature clicking in the box but only if you previously turned on the 7.1 ch virtual speaker. 1. VOLUME CONTROL Adjust the mic-in and monitor volume with the sliders, you can mute them clicking in the icons.
Page 12
2. SAMPLE RATE 3. vOice fX Choose the sample rate quality, you can choose between 44.1 KHz or 48 Enable the voice effects clicking on the magic voice box and after select the KHz sample rates. desired voice effect from monster, cartoon, male or female. You can also set the level of the microphone echo effect with the slider.
Need help?
Do you have a question about the RAGE Z90 and is the answer not in the manual?
Questions and answers