Advertisement
Using your Cool Touch 3 Toaster
Plug the toaster into a 220-240 volt AC
power outlet and switch the power on.
Toasting Bread
1. Position the bread into the bread slot.
2. Select the desired browning setting using
the Electronic Browning Control.
Note: If toasting 1 slice (in the TA1211 2
slice) it is recommended that you use a lower
browning setting to achieve your required
result and to prevent burning.
Important: Do not toast stale bread, rice
crackers or similar on a high setting as there
is a chance that they may catch fire.
3. Push the Toasting Lever down to
commence the toasting cycle.
4
4
5. When the desired browning is achieved,
the toaster will automatically stop toasting
and pop the toast up.
6. If you need to remove the toast before the
cycle is complete, press the Stop button.
The Stop button will immediately interrupt
the toasting cycle and pop the toast up.
7. To remove small pieces of toast, crumpets
or bagels, use the High-lift Lever to lift the
toast above the starting position. This will
prevent burning your fingers as you remove
the toast.
Advertisement
