Download Print this page

Troubleshooting Guide - Sunbeam COOL TOUCH 3 User Manual

2 slice toaster

Advertisement

Troubleshooting Guide

Problem
Unit is not heating
or stops heating.
Uneven toast.
Toast does not pop
up high enough.
Second toasting
is too dark.
Bread is jammed.
Toast is too light
or too dark.
You smell burnt
food or smoke is
coming out when
toaster is being
used.
Tripping the RCD.
8
Possible Cause
Electrical outlet is not
working or toaster is
unlugged.
Toasting single slice or
toasting brown bread.
Different size of bread.
Setting on toast is too dark. If doing repeated toasting in the toaster, you may
The bread may be too thick. Most breads, pastries and bagels will fit into the
You may have changed the
setting.
Remnants of food in crumb
tray.
Some materials is shorting
the heating element.
Solution
Check to make sure the outlet is working.
Unplug unit and re-insert plug. Test toaster
by selecting a setting and depressing the toast
control level with nothing in the toaster.
Simply reset the selector to the desirable setting.
Use the high lift lever function to lift the bread.
want to select a setting lower than the previous
setting.
slot, however, occasionally the bread may be too
thick. Simply remove from the toaster and slice
thinner.
Simply reset the selector to the desirable setting
for the function you wish to use.
Refer to the directions in CARE AND CLEANING
section of this booklet. Make sure the crumb tray
is empty and wiped clean. Check to make sure no
large crumbs are caught in the slot.
Turn unplugged unit upside down over the sink
and shake to remove crumbs.
Unplug the unit and check for any materials such
as raisin left inside the unit. If the unit is clean
and still trip the RCD, pls stop using the unit and
call the customer service.

Advertisement

loading