Radio - Kenwood KDC-210UI Instruction Manual

RADIO

Search for a station
1
Press repeatedly to select TUNER.
2 Press repeatedly to select FM1/FM2/FM3/MW/LW.
Press S / T to search for a station.
3
• To change the searching method for S / T: Press
repeatedly.
AUTO1 : Automatically search for a station.
AUTO2 : Search for a preset station.
MANUAL : Manually search for a station.
• To store a station: Press and hold one of the number buttons
(1 to 6).
• To select a stored station: Press one of the number buttons
(1 to 6).
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following
table), then press the knob.
3 Repeat step 2 until the desired item is selected/activated or
follow the instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
6
ENGLISH
TUNER SETTING
LOCAL SEEK
AUTO
MEMORY
MONO SET
NEWS SET
REGIONAL
AF SET
TI
PTY SEARCH
CLOCK
TIME SYNC
.
ON: Searches only stations with good reception. ; OFF: Cancels.
• Settings made are applicable only to the selected source/station. Once you change
the source/station, you need to make the settings again.
YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 5)
ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.
ON: The unit will temporarily switch to News Programme if available. ; OFF: Cancels.
ON: Switches to another station only in the specific region using the "AF" control. ;
OFF: Cancels.
ON: Automatically searches for another station broadcasting the same program
in the same Radio Data System network with better reception when the current
reception is poor. ; OFF: Cancels.
ON: Allows the unit to temporarily switch to Traffic Information if available ("TI"
lights up). ; OFF: Cancels.
1 Turn the volume knob to select the available Program Type. ( 7)
2 Turn the volume knob to select the PTY language (ENGLISH/FRENCH/
GERMAN), then press the knob.
3 Press S / T to start searching.
ON: Synchronizes the unit's time to the Radio Data System station time. ;
OFF: Cancels.
Default: XX