Features Compatible with PCI Express 1.1 interface with bus mastering and burst modes Audio format supports 192K/176.4K/96K/88.2K/48K/44.1K and 16/24bits resolution Integrated 192K/176.4K/96K/88.2K/48K/44.1K, and 16/24-bit SPDIF transmitter/Receiver System Requirements PCI Express-enabled system with an available PCI Express slot ...
Hardware Installation Turn off the computer, Unplug the power cord. Open the computer case. Check with your computer manufacturer if you need additional instructions. Remove any old third-party sound cards or the metal PCIe slot bracket. Insert the sound card into a blank PCIe slot. Make sure that all of its pins are touching the PCIe slot’s contacts.
Page 4
Note: If the install program doesn’t run automatically, please locate and double-click on the Autorun.exe file in the CD to launch the install program. Please click “PCI Express”. *Note: Actual image may vary MN4000000073 Page 4 Please click “CM8828 8CH” to start the installation.
*Note: Actual image may vary Follow the instructions on screen to install the driver. Physical Connections MN4000000073 Page 5...
Page 6
The rear panel of this 7.1 Channel PCIe Sound Card has the following jacks: Line In (blue): Connect to tape/CD/DVD player, or other audio sources for output mixing and/or recording MIC In (pink): Connect to microphone Front Speaker (green): Connect to headphone or amplifying speakers Center/Subwoofer (orange): Connect to center/subwoofer speakers while 6/8 channel speaker mode is enabled (via external...
Page 7
Port 2-channel 4-channel 6-channel 8-channel Green Line Out Front Front Front Speaker Speaker Speaker Gray Rear Rear Rear Speaker Speaker Speaker Orange Center Center /Subwoofer /Subwoofer Black Side Speaker In addition to the rear panel jacks, this 7.1 Channel PCIe Sound Card also has the following internal connection: The Function 9.
Need help?
Do you have a question about the cm8828 and is the answer not in the manual?
Questions and answers