Removing The Doors - Electrolux ei23bc30ks4a Use And Care Manual

Removing the Doors
Getting through narrow
s Unscrew the three lower hinge screws
and hinge if necessary.
spaces
To reinstallthe right door, reversethe above steps.
if your refrigerator will not fit through an
entrance area, you can remove the doors. Lower Hinge Removal
Check first by measuring the entrance. __
To prepare for removing the doors:
1
unplugged from the wall outlet,
2 Open the freezer drawer and remove the
toe grille (see "installation" section).
3 Remove any food from the door shelves
and close the doors.
To remove the refrigerator doors:
1 Trace lightly around the door's top hinges
with a pencil. This makes reinstallation easier.
Front
Cover Screw,, Rear
To i e _ Cover
p H ng __ Screw
£;over
Hinge
Screws round
crew./
Multi-w
Cables _p
Leave _._,[ Hinge
Hinge/ | /ii |'_
With "_(f-_. °i
Make sure the electrical power cord is
Once both doors are in place, ensure they are
aligned with each other and level (please see
the "installation" section for more details), and
replace the top hinge cover.
Removing Freezer Drawer
Ooen freezer drawer,
Remove arawer screws on rlgnt ana eft
slaes two screws on each slae..
Remove hex
head drawer
Do Not Remove
2 Disconnect the harness by grasping both
sides of the connector firmly, depress the
latch, and pull apart. Remove the two
screws from the top hinge. Lift the door
off of the bottom hinge and set it aside.
Remove
Hex Hex
HeadDrawer Head Drawer
Screw Screw
3 Lift drawer up and out to remove.