Starting A Session; Canceling A Session; Getting And Changing Parameters - Salon Systems T-Max Manager User Manual

6.3.3

Starting a Session.

1) Place the mouse in the Time window beside the bed number that you want to start.
2) Press the Left mouse button.
3) The Start Session window will appear. Enter the bed number you want to start and the desired
session time in minutes.
4) Click Yes. If you don't want to start a session, click No.
5) The session will start and the display will show the bedtime and status.
6.3.4

Canceling a Session.

1) Place the mouse in the Time window beside the bed number you want to Cancel.
2) Press the Left mouse button.
3) A cancel session window will appear. If the displayed bed is correct, press Yes. If the displayed
bed is not the bed you want to cancel, enter the correct bed number click Yes with your left mouse
button. If you don't want to cancel any session, click No.
6.3.5

Getting and Changing Parameters

1) Click Bed Parameter Utilities with your left mouse button.
2) Click Upload Parameter from Beds. The Timer Parameter Access screen will appear:
Timer Parameter Access Window
3) To change a parameter, move the mouse to the window beside Password and click it with your
left mouse button. A flashing cursor will appear in the window. Enter the password (see the
attached password sheet provided with this manual). As you enter the password, an (*) will appear
for each character.
After the password has been entered, place the mouse in the window where you want to
change the parameter. For example, if you want to change parameter 5 for bed 2, place the
T-Max® Manager and T-Max® 1A User's Guide Page 18