Advertisement
4.6.
How to removing the USB/AUX socket circuit assembly.
4.7.
How to removing the handle from protective flame assembly.
1. Disconnect the USB/AUX socket circuit assembly 3P connector and
AUX 3P connector from circuit assembly A.
2. Remove the two tapping screws that attach the USB/AUX socket cir-
cuit assembly.
3. Remove the USB/AUX socket circuit assembly from the housing A
assembly.
* When reattaching the USB/AUX socket circuit assembly, insert the tip
of the protruding part of the AUX socket into the hole in the housing A
assembly.
1. Remove the four Torx screws that connect the handle and the protec-
tive frame assembly.
2. While holding the handle in place, move the protective frame assem-
bly to the left and right four or five times and then lift it up to remove it
from the handle.
* Exercise care as use of excessive force when removing the protective
frame assembly may cause the handle to crack.
16
Hide quick links:
Advertisement
