Table of Contents
Advertisement
Quick Links
How to install and
operate the
X-D50
digital 5-channel
amplifier
Welcome!
This owners manual is written in easy english and
uses a lot of drawings to simply the installation and
use of the above amplifiers.
Your X-program amplifiers must be installed
correctly in order to work well. This manual will show
you how to install the amplifier like a pro. Please
read the entire manual before beginning the
installation.Install the amplifier yourself if you feel
confident with our instructions and if you have the
proper tools. However if you feel unsure, turn over
the installation job to someone better suited to it.
Warranty Service
This amplifier is covered by warranty, depending
on the conditions in the country where it is sold. If
the amplifier is returned for service, please include
the original dated receipt with the product.
Technical Assistance
For technical assistance ask the shop where the
product was sold or the distributor in your very coun-
try. Information can also be found on our WEB-site
www.xprogram.com
We follow a policy of continuous advancement in
development. For this reason all or part of
specifications & designs may be changed without
prior notice.
DECLARATION OF CONFORMITY
X-program amplifiers for vehicles are manufactured
in accordance with the EU directive EEC 95/54 (72/
245/EEC) and are marked with the approval number.
They are also marked in accordance with the WEEE-
directive 2002/96/EC.
The products are also produced in accordance with
the EU RoHS directive 2002/95/EC.
Contents
Features...................................
Installation................................
Tools and materials needed..........
Amplifier installation kit................
Routing Wires............................
Power and Outputs.....................
Inputs and controls.....................
High and low level inputs...............
Input level control...........................
Four speakers and subwoofers.......
Testing......................................
Troubleshooting...........................
Professional tips..........................
Specifications.............................. 11
Approval of electromagnetic compatability according
to the EEC Directive 72/245/EEC and 2006/96/EC
E 13
Approval No: 03 6367
This product must be returned to the
separate collection system for electronic
products. Do not dispose this product
together with general household waste.
X-program is designed, engineered and distributed by:
DLS Svenska AB
P.O. Box 13029 - SE-40251 Göteborg - Sweden
Tel: +46 31 840060 - Fax: +46 31 844021
E-mail: info@dls.se
www.xprogram.com
X-program products are produced in Taiwan
2
2
3
3
3
4
5
5
6
6
7
8
9
9
10
Advertisement
Table of Contents
Related Manuals for X-PROGRAM X-D50
Summary of Contents for X-PROGRAM X-D50
-
Page 1: Table Of Contents
Do not dispose this product specifications & designs may be changed without together with general household waste. prior notice. X-program is designed, engineered and distributed by: DECLARATION OF CONFORMITY X-program amplifiers for vehicles are manufactured DLS Svenska AB in accordance with the EU directive EEC 95/54 (72/ P.O. -
Page 2: Features
1 mm hex. screws. The logo can be removed and twisted 90 or 180 degrees, and then screwed The X-program series of amplifiers have a compact back in wanted position. The logo can be mounted design that allows great flexibility in mounting. You in four different ways to match your installation. -
Page 3: Tools And Materials Needed
Tools and material needed Routing wires Tools: Flat and Phillips screwdrivers Wire cutter Wire stripper Electric drill with drills Crimping tool Digital multimeter or test lamp Wire brush, scraper or a piece of an abrasive sheet to remove paint for a good ground connection Stereo Grease to protect the ground head unit... -
Page 4: Wiring
Wiring Power and Outputs Remote terminal ( REM ) Power terminal ( +12V) For RCA cable signal input: Connect the radio power antenna lead = remote Connect the fuse holder as close to the vehicle turn on/off from the car stereo to the amplifier remote battery + as possible, using AWG 4 = 21 mm connection. -
Page 5: Inputs And Controls
Use either the low level or high level input, do not X-D50 use both at same time. On X-D50 the high level signal is fed internally to Low level input channel SUB when using high level input. Use a pair of shielded stereo audio cables with RCA type jack. -
Page 6: Input Level Control
Crossovers and other features X-D50 is a 5-channel amplifier for use with a front and rear system and a subwoofer. The amplifier has the following filters / features: Stereo sections (front &... -
Page 7: X-D50 Speaker Wiring: Four Speakers And Subwoofers
X-D50 Speaker wiring X-D50 1. Two or four fullrange speakers to the front 2. One or two subwoofers to mono sub channel, and rear speaker channels Each speaker min 4 ohm. - Front Speaker - - Rear Speaker - Filter settings Front & rear channels... -
Page 8: Two Speakers Bridged + Subwoofer
X-D50 Speaker wiring in bridge mode X-D50 1. Two fullrange speakers to X-D50, 2. One or two subwoofers to mono sub connected in bridge mode to front & rear channel, Each speaker min 4 ohm. channel pairs. Front speakers connected in bridge mode... -
Page 9: Testing
Testing Troubleshooting Before you finish the installation, you should do the If problems occour during the installation, or later, following tests to make sure the wiring is correct and this guide might help you to find out whats´s wrong. everything is operating properly. THE AMPLIFIER IS DEAD: 1. -
Page 10: Professional Tips
Professional Tip: Professional Tip: NOISE PROBLEMS SPEAKER POLARITY CHECK. WHINING NOISE VARYING WITH ENGINE All speakers in a car audio system should be REVOLUTIONS: connected in phase (the same polarity). All spea- ker cones must move in the same direction. Out of Do this: phase speakers will cause a lack of bass, and a Rewire the power supply (12 V) to source... -
Page 11: Specifications
Weight 4,7 kg / 10,4 lbs DECLARATION OF CONFORMITY X-program amplifiers for vehicles are manufactured in accordance with the EU directive EEC 95/54 (72/ 245/EEC) and are marked with the approval number. They are also marked in accordance with the WEEE- directive 2002/96/EC. - Page 12 DLS Svenska AB P.O. Box 13029 SE-40251 Göteborg, Sweden Tel: +46 31 840060 Fax: +46 31 844021 E-mail: info@dls.se www.dls.se www.xprogram.com...
Need help?
Do you have a question about the X-D50 and is the answer not in the manual?
Questions and answers