Cleaning The Hose And Nozzle; Cleaning The Floor Nozzle; Cleaning The Turbo Nozzle - Electrolux ultrasilencer Manual

1
4
8
1 1
13
14
2193042-03.indd 14
Downloaded from www.Manualslib.com
2
5 6
9
2 1
manuals search engine
English

CLEANING THE HOSE AND NOZZLE

The vacuum cleaner stops automatically if the nozzle, tube,
Tubes and hoses
2 It may also be possible to remove the obstruction in the
3
obstruction is caused by glass or needles caught inside
Note: The warranty does not cover any damage to the hose
caused by cleaning it.

Cleaning the floor nozzle

3 To avoid deterioration of suction power, frequently
7
nection hose (press the small catches located on each
side and simultaneously draw the connection tube
Cleaning the power nozzle
(certain models only)
8 Disconnect from the mains, and remove entangled
10 Remove the brush cylinder and bearings, then clean as
1
0
11 To clean the wheels, gently lever them from their

Cleaning the turbo nozzle

(certain models only)
13 Disconnect the nozzle from the vacuum cleaner tube
-
12/6/07 4:34:57 PM