Advertisement
23.
Don't cover the unit with anything during operation or a short time after it's shut down.
24.
Don't wrap the power supply cord on the unit.
25.
The unit must be handled with care, and avoid of vibration or hitting.
26.
The unit must be securely grounded during operation.
27.
When damaged, the unit must be repaired by professional repairing team.
28.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
29.
The heater must not be located immediately below a socket-outlet.
30.
When assembling, keep clear from any board or flammable material.
31.
Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire
risk exists if the heater is covered or positioned incorrectly.
32.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
33.
Children should be supervised to ensure that they do not play with the appliance.
34.
The unit is for household use only. It's not allowed to use in building site, greenhouses, barn or stable where there's
flammable dust.
35.
The head of the unit is at high temperature during operation. Unplug the unit and wait till it's cool before cleaning.
36.
Don't use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
37.
Don't use this unit in place where causticity or volatile air exists, i.e. dust, steam, gas, etc.
38.
Don't use this unit as a cloth drier or towel drier.
39.
Dont' use this unit as a sauna heater.
40.
Don't use this unit as a room heater of heat storing.
41.
Don't use this unit in place of animal propagating and raising.
42.
Don't use this unit in heating system of hot air centre.
43.
Don't immerse this unit into water for cleaning.
44.
The unit should be plugged in a socket, which is easily visible and reachable.
45.
Two Dark points may exist on the surface of the heating elements, or the surface of the heating element may turn white
during the first few minutes after it's turned on. This is normal, and may not affect the performance of the unit
Cleaning:
Unplug the unit before cleaning. It should be wiped with wet cloth. Don't use too much water.
No.
Part Name
No.
1
Screw M6*20
7
2
Washer
8
3
Base
9
4
Base Cover
10
5
Base Bracket
11
6
Deco. Board
12
Part Name
Alum. Fixture
L Bracket
Screw M8*6
Screw M4*6
Control Box
Screw M6*16
5
Advertisement
