AEG AGS88800F1 User Manual page 28

28 www.aeg.com
Problem
Power indicator light is flash-
ing.
A rectangular symbol is
shown instead of numbers
on the Temperature Display.
The compressor operates
continually.
There is too much frost and
ice.
Possible cause
The temperature in the ap-
pliance is too high.
The door is left open.
An error has occurred in
measuring the temperature.
The appliance is not working
properly.
The temperature in the ap-
pliance is too high.
Temperature sensor prob-
lem.
Temperature is set incorrect-
ly.
Many food products to be
frozen were put in at the
same time.
The room temperature is too
high.
Food products placed in the
appliance were too warm.
The door is not closed cor-
rectly.
The FROSTMATIC function
is switched on.
The door is not closed cor-
rectly or the gasket is de-
formed/dirty.
The water drainage plug is
not correctly positioned.
Food products are not wrap-
ped properly.
Solution
Refer to "Door Open
Alarm"or "High Tempera-
ture Alarm".
Close the door.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
Contact a qualified electri-
cian or contact the nearest
Authorized Service Centre.
Contact the nearest Author-
ized Service Centre (the
cooling system will continue
to keep food products cold,
but temperature adjustment
will not be possible).
Refer to "Operation" chap-
ter.
Wait some hours and then
check the temperature
again.
Refer to climate class chart
on the rating plate.
Allow food products to cool
to room temperature before
storing.
Refer to "Closing the door".
Refer to "FROSTMATIC
function".
Refer to "Closing the door".
Position the water drainage
plug in the correct way.
Wrap the food products bet-
ter.