Brookstone FLIGHTFORCE Manual page 20

INSTALLING THE microSD CARD IN THE MICRO
VIDEO DRONE
1 . Place the formatted microSD card into the microSD
CARD SLOT and push gently until a "click" is heard as
shown in figure L .
Fig. L
microSD card facing up
2 . Ensure the Micro Video Drone is synced to the controller
(see page 19 for syncing instructions) .
3 . The REAR LED INDICATORS will be solid when the
microSD card is successfully installed .
NOTE: The REAR LED INDICATORS will rapidly flash
to indicate the microSD card is not installed correctly or
there is a problem with the card.
36
TAKING PHOTOS
Press the CAMERA BUTTON to take a photo . A beep will
sound and the REAR LED INDICATORS will flash to
confirm the photo has been taken . When the REAR LED
INDICATORS return to solid, another photo can be taken .
RECORDING VIDEOS
Press and hold the CAMERA BUTTON for 3 seconds to start
recording a video . The REAR LED INDICATORS will flash
constantly to indicate that a video is recording .
Press the CAMERA BUTTON to stop recording . When the
REAR LED INDICATORS return to solid, another video can
be recorded .
Note: When the microSD card is full, the REAR LED
INDICATORS will not flash when the CAMERA BUTTON
is pressed to indicate there is no memory space on the
card.
37