Advertisement
Verify the connection: the Lnk (link) LED on the UIM-DS3 and UIM-E3 faceplate will flash green
to indicate a network connection has been established.
For further information refer to the Installation Instructions for each individual UIM model.
2.0 IP DSLAM MANAGEMENT
The MUM200-2 provides IP DSLAM management capability via Net to Net's web-based Network
Management System (NMS) and a scaled-down version of Simple Network Management Protocol (SNMP).
For access and configuration instructions, refer to Net to Net's NMS Management User Guide.
3.0 ADDITIONAL INFORMATION
3.1 LED Indications
LED
PWR
(Power)
Fan
Lnk (Link)
UIM Lnk
(Link)
220-0000069 rev 04
State
Indication
solid green
MUM200-2 is receiving
power
solid amber
MUM200-2 is receiving
power
no
no power
illumination
no
all fans are functioning
illumination
solid amber
non-functioning fan
solid green
direct Ethernet
management connection is
established
no
no direct connection via
illumination
the MGMT port is
established
solid green
UIM-10/100 Ethernet
uplink connection is
established
flashing
UIM-T1/E1 or UIM-DS3/E3
green
uplink connection is
established
no
no uplink connection is
illumination
established
Additional Information
Both IP DSLAM power terminals are connected.
One of the two IP DSLAM power terminals are
connected.
The MUM200-2 is not receiving power (the IP
DSLAM may not be receiving power either).
All four of the fans on the IP DSLAM fan card are
functioning.
One or more of the four fans on the IP DSLAM fan
card are no longer functioning.
The Lnk LED applies only to direct physical
connections with the MGMT port; it does not
apply to uplink network connections.
The MGMT Ethernet port runs at 10 Mbps and
Half Duplex.
For further information regarding UIM-10/100
LEDs, please refer to the corresponding UIM
Installation Instructions.
For further information regarding UIM-T1/E1 or
UIM-DS3/E3 LEDs, please refer to the
corresponding UIM Installation Instructions.
Applicable to all UIM models types.
Advertisement
