Next PORTOFINO MINK BED Assembly Instructions

Advertisement

Quick Links

IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY.

Tools Needed

Helpline

If you have any problems with this product or
require any replacement fittings please contact
Customer Services Tel: 0844 844 8999
Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the
item is found to be faulty. Should you need to return the unassembled product, please repack in the
original packaging.
IMPORTANT
• We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
• Carefully check that you have all the parts before beginning assembly.
• Keep fittings out of children's reach and keep children well away from construction area.
• We suggest you retain these instructions for future reference.
• A minimum of 2 persons is required to assemble this product.
• We recommend that the packaging is used to protect the surfaces during assembly.

PRODUCT INFORMATION

• Made with fabric covering.
• Fabric content: 64% polyester, 36% viscose.
• Made in China.

CARE INSTRUCTIONS

• Hair products such as hairsprays, oils and gels may affect the finish. Avoid prolonged contact with such
products.
• Regular cleaning is essential to avoid build up of these products on the surface.
• Avoid exposure to direct or prolonged periods of sunlight and position away from direct heat sources
such as radiators.
• Care should be taken to avoid spilling anything on the upholstery. If a spillage occurs act promptly and
soak up any liquids by blotting with a clean absorbent cloth. Never rub to remove stains. Never use a wet
cloth.
• If a spillage does occur, blot any liquids immediately with a clean, dry absorbent cloth and allow to dry
naturally.
• For more stubborn stains a professional upholstery cleaner should be consulted.
• Clean periodically in situ using a professional cleaning company.
• All assembly fixings should always be tightened properly and periodically check all fixings and tighten if
necessary.
PORTOFINO MINK BED
ASSEMBLY INSTRUCTIONS.
Page 1 of 5

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PORTOFINO MINK BED and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Next PORTOFINO MINK BED

  • Page 1 PORTOFINO MINK BED ASSEMBLY INSTRUCTIONS. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. Tools Needed Helpline If you have any problems with this product or require any replacement fittings please contact Customer Services Tel: 0844 844 8999 Regrettably self assembly items cannot be returned once assembly is part or fully completed unless the item is found to be faulty.
  • Page 2 FITTINGS PARTS STEP ONE 1. Attach 4 x wooden legs 6 to headboard 1 and footboard 2 with 4 x bolts (A2), 4 x flat washers (D) and 4 x spring washers (C), tighten using Allen key (H). STEP TWO 1.
  • Page 3 STEP THREE 1. Attach 2 x centre support legs 5 to centre rail 4 with 4 x bolts (B), 4 x washers (D) and 4 x nuts (E), tighten using a screwdriver. 2. Attach centre rail 4 to headboard 1 and footboard 2 with 4 x bolts (A1), 4 x spring washers (C) and 4 x washers (D), tighten using Allen key (H).
  • Page 4 STEP SIX 1. Position the assembled bed base to side rails 3 and centre rail 4 and firmly insert the pins of the slat caps (F&G) into the holes in each rail. 2. Repeat with all slats to attach the bed base. STEP SEVEN IMPORTANT: Once the feet have been assembled and...
  • Page 5 Next Retail Ltd, Desford Road, Leicester, LE19 4AT Page 5 of 5...

Table of Contents