Contents Overview ........... 4 Using the Smartwatch without Use .............. 5 the Crane Connect app ......24 Product contents/device parts ....6 Compatibility ........... 26 QR code ............7 Downloading and installing the app .. 27 General information ......... 8 Connecting the Smartwatch to your smartphone/tablet ......
Page 3
Daily goals ..........37 Disposal ...........60 Setting daily goals ........39 Disposal of packaging ......60 Sleep mode ..........41 Disposing of the Smartwatch ....60 Warranty card .......... 63 Activating sleep mode ......42 Warranty conditions ....... 65 Deactivating sleep mode ......43 Search mode ..........43 Customer service ........68 Camera mode ..........44 Alarm function ........
QR Codes Try it out now Just scan the QR code with your smartphone and find out more about the Aldi product you have purchased.* *Depending on your tariff plan you may be charged for the connection. AFTER SALES SUPPORT service@cranesportsconnect.com...
General information Reading and storing the user manual This user manual accompanies this analogue Smartwatch. It contains important in- formation about operation and care. For improved readability, the analogue Smart- watch will be referred to only as the “Smartwatch” below.
General information Explanation of symbols The following symbols and signal words are used in this user manual, on the Smartwatch or on the packaging. WARNING! This signal symbol/word designates a hazard with moderate degree of risk which may lead to death or severe injury if not avoided.
Page 10
General information NOTICE! This signal word warns against potential damages to property. This symbol provides you with useful supplementary information on assembly or operation. Declaration of conformity (see chapter “Declaration of conformity”): Products marked with this symbol meet all applicable Community regulations for the Euro- pean Economic Area.
Safety Google Play™ and Android™ are trademarks of Google Inc. Apple, the Apple logo, iPad and iPhone are registered trademarks in the USA and other countries by Apple Inc. App Store is a service mark of Apple Inc. The Bluetooth® word mark and logos are registered trademarks of Bluetooth SIG, Inc.
Safety Only use the Smartwatch as described in this user manual. Any other use is deemed improper and may result in damage to property or even personal injury. The manufacturer or vendor accepts no liability for damage caused by improper or incorrect use.
Page 13
Safety WARNING! Danger of explosion! Rechargeable batteries may explode if they are excessively heated up. − Do not heat up the Smartwatch. − Keep the Smartwatch away from hot surfaces. − Do not expose the Smartwatch to direct sunlight or other heat sources, e.g. in a vehicle. −...
Page 14
Safety WARNING! Danger for children and persons with impaired physical, sensory or mental ca- pacities (e.g. partially disabled persons, older persons with reduced physical and mental capacities) or lack of experience and knowledge (e.g. older children). − This Smartwatch may be used by persons with impaired physical, sensory or mental capac- ities or those lacking experience and knowledge if they are supervised or have been in- structed in how to safely use the Smartwatch and have understood the risks associated with operating it.
Page 15
Safety CAUTION! Health hazard! The Smartwatch is not a medical device; it is a workout aid for calculating the distance covered and calories consumed. − Always consult a physician before you start a regular workout routine. AFTER SALES SUPPORT service@cranesportsconnect.com 00800 52323000...
Page 16
Safety NOTICE! Risk of damage! Improper handling of the Smartwatch may result in damage. − Do not use the Smartwatch if it exhibits visible damages. − Do not open the housing of the Smartwatch and have qualified professionals perform repairs. Contact the manufacturer at the service address specified on the warranty card if re- pairs are needed.
Page 17
Safety − Do not place any heavy objects on the Smartwatch and do not apply pressure to the Smart- watch. − Protect the Smartwatch against impacts and shocks. − Do not submerge the Smartwatch and charger in water or other liquids. −...
Page 18
Safety − Peak pressures may occur when swimming or when exposed to a water jet (e.g. when showering or washing your hands). During such activities, affected areas may be subjected to a significantly greater pressure than expected for the immersion depth. Only watches with a classification of 5 bar or more can be considered watertight (showering allowed).
Safety Checking the Smartwatch and pack contents NOTICE! Risk of damage! If you are not cautious when opening the packaging with a sharp knife or other pointed objects, you may quickly damage the Smartwatch. − Be very careful when opening. 1.
Start-up 4. Check whether the Smartwatch or the individual parts exhibit damages. If this is the case, do not use the Smartwatch. Contact the manufacturer at the service address specified on the warranty card. Start-up Activating the Smartwatch The Smartwatch is set to standby for purchase.
Start-up Charging the rechargeable battery of the Smartwatch NOTICE! Risk of damage! Improperly connecting the charger may damage the Smartwatch. − Only use the enclosed charger and a USB port on your PC or a USB mains adapter to charge the rechargeable battery of the Smartwatch.
Page 22
Start-up 1. Before starting the charge process, dry the charging contacts on the back of the Smart- watch thoroughly if necessary to avoid corrosion. 2. Place the Smartwatch with its back on the charging contacts of the charger so that the charging cable is pointing to 09:00 (see fig.
Start-up and no longer flashing. 4. Pull the USB plug out of the USB mains adapter or the PC as soon as the rechargeable bat- tery has been fully charged. 5. Take the charger off of the back of the Smartwatch. Activating/deactivating Bluetooth®...
The Crane Connect app The Crane Connect app All functions of the Smartwatch can only be used in connection with the Crane Connect app. You can download it free-of-charge in the App Store and the Google Play™ Store. With the Crane Connect app, you can: •...
Page 25
The Crane Connect app Without the Crane Connect app, your data can only be shown for the current day. The data can only be permanently stored and displayed once the data has been transferred and uploaded to the website while you are connected to the Internet. Without the Crane Connect app, you cannot adapt the factory default targets to your individual targets.
The Crane Connect app Compatibility The following smartphones and tablets with Bluetooth® Smart Ready (Bluetooth® 4.0 and higher) are compatible with the Smartwatch and the Crane Connect app: • Apple® iPhone® 4s and more recent versions • Apple® iPad® 3rd generation and more recent versions •...
The Crane Connect app Downloading and installing the app 1. Download the free Crane Connect app from the App Store (if you are an iPhone® or iPad® user), from the Google Play™ Store (if you are an Android™ user), at https://www.cranesportsconnect.com under the “Downloads”...
Page 28
The Crane Connect app To avoid long download times and associated costs, it is recommended that you use a Wi-Fi connection for downloads. 2. Install the Crane Connect app on your smartphone or tablet. Follow the registration instruc- tions step-by-step to do so. You can also create your user account on the website https://cranesportsconnect.com.
To do so, read the chapter “Activating/deactivating Bluetooth®”. 2. On your smartphone or tablet, open the Crane Connect app and access “All Settings”. 3. Push “Analogue Smartwatch”. 4. Push “Connect” in the “Pairing” field. The Crane Connect app will now start to look for a compatible Smartwatch.
Page 30
Connecting the Smartwatch to your smartphone/tablet The scan will take approx. 30 seconds. If the app is unable to find a compatible Smartwatch during this time, the scan will stop and the Smartwatch will switch back to normal mode. − Push the lower button to manually return to time mode. After successful synchronisation, the app will display the ID of the paired Smartwatch and the message “Success!”...
Setting the time Setting the time Setting the time without the Crane Connect app You can manually set the time on the Smartwatch . To do so, proceed as follows: 1. Pull the crown out. 2. Turn the crown clockwise until the desired time is reached. 3.
Notifications 2. Start the Crane Connect app and open the settings for the Smartwatch. Click “Sync ana- logue time” here. Once you have entered the time currently displayed by your Smartwatch and tapped “Sync”, the Smartwatch will sync with the time on your smartphone/tablet. If the rechargeable battery of the Smartwatch was empty and you recharged the Smartwatch, the Smartwatch will now synchronise on its own once the Crane Connect app is opened.
Notifications Configuring notifications 1. On your smartphone or tablet, open the Crane Connect app and access the settings for the Smartwatch 2. Scroll down to “Alert settings”. 3. Activate the desired notification functions by pushing the corresponding slider to the right If you would like to configure how the Smartwatch is to alert you of a notification, push the arrow to the right of the slider.
Notifications Receiving notifications To be able to receive notifications, your smartphone or tablet must be within Bluetooth® range. The Smartwatch will display the last 10 messages. If a call is received on your smartphone, the Smartwatch will notify you with the signals config- ured in the app.
Page 35
Notifications symbol will flash if you have enabled “Flash” in the settings. If an e-mail is received on your smartphone or tablet, the Smartwatch will notify you with the signals configured in the app. symbol will flash if you have enabled “Flash” in the settings. If the Bluetooth®...
Locating the Smartwatch − Push the upper button to browse through the notifi cations received. − To delete all notifi cations received on the Smartwatch, hold the upper button down for ap- prox. 2 seconds. The Smartwatch will automatically return to the blank notifi cation mode. −...
Daily goals 2. Scroll down to “Find Watch”. 3. Push “Search”. If the watch is within Bluetooth® range, it will emit an alarm. The status signals, which the Smartwatch notifies you with, can be configured in the Crane Connect app. Daily goals With the Smartwatch and the corresponding Crane Connect app, you are capable of setting dai- ly goals for your physical activities.
Page 38
Daily goals • Distance – The Smartwatch determines the distance you cover in one day in km or miles. The calculation is based on the steps counted and your individual data, which the Smartwatch obtains from the Crane Connect app. The distance tracker is automatically reset to zero at 12 midnight.
Daily goals Your Smartwatch stores all data recorded for 7 days. Setting daily goals To set a daily activity goal that you can compare with the Smartwatch , proceed as follows: 1. On your smartphone or tablet, open the Crane Connect app and access the settings for the Smartwatch.
Page 40
Daily goals 4. In time mode, push the lower button twice to access activity mode. You will first enter the step screen. The step screen shows you the number of steps for the day. 5. In the step screen, push the upper button to access the distance screen.
Sleep mode 9. In the goal screen, push the upper button to access the step screen or push the lower but- ton to switch to sleep mode. • You can repeat all modes of the activity mode as often as you like by pushing the upper button.
Sleep mode Activating sleep mode Wear the Smartwatch when you go to bed and set the “Auto Sleep” in the Crane Connect app or activate the sleep mode on the Smartwatch as follows: 1. In time mode, push the lower button three times to access sleep mode.
Search mode Deactivating sleep mode You can deactivate sleep mode as follows: 1. Hold the upper button down for 2 seconds to turn sleep mode off. The symbol and the last sleeping time will appear on the OLED display. 2. Hold the upper button down for 2 seconds to reactivate sleep mode or push the lower but- to access search mode.
Camera mode If your smartphone or tablet is now within Bluetooth® range and Bluetooth® has been acti- vated, it will respond with a signal as soon as you push the upper button. 3. Push the upper button to repeat the search or push the lower button to access camera mode.
Alarm function If the camera does not respond to the Smartwatch, check the privacy settings for your smartphone or tablet as to whether the camera has been approved for the Crane Connect app. 5. Push the upper button to take another photo or push the lower button to access time mode. Alarm function In the Crane Connect app, you can configure up to three alarms per day.
Disconnecting the Smartwatch from the smartphone/tablet 5. Activate the desired alarm by pushing the corresponding slider to the right ( 6. Make sure that Bluetooth® is activated on your smartphone or tablet. You have now set the alarm. − If necessary, you can set two further alarms in this way. −...
Resetting the Smartwatch 3. Push “Disconnect”. To completely disconnect the Smartwatch from your smartphone or tablet, also check for the Bluetooth® connections in your smartphone or tablet settings and remove the Smartwatch there as well. Resetting the Smartwatch Proceed as follows if you would like to reset the Smartwatch: −...
Symbol table Symbol table Symbol Meaning • Time and date – screen 1 • Time and date – screen 2 • Time and date – screen 3 • Alarm • Step screen • Distance screen • Calorie screen • Active time screen AFTER SALES SUPPORT 00800 52323000 service@cranesportsconnect.com...
Page 49
Symbol table Symbol Meaning • Goal screen • Incoming call • Incoming message (SMS, Twitter etc.) • Missed calls/messages/e-mail • No new notifications • Camera mode activated • Search mode activated • Bluetooth® connection lost AFTER SALES SUPPORT service@cranesportsconnect.com 00800 52323000...
Page 50
Symbol table Symbol Meaning • Connection mode activated • Connection failed • Connection successful AFTER SALES SUPPORT 00800 52323000 service@cranesportsconnect.com...
Watertightness Watertightness The Smartwatch has been tested for watertightness up to 5 bar. It is therefore suitable for daily use, e.g. when showering or washing your hands. Situation Watertight to 5 bar* Rain, Splashes Washing hands Showering AFTER SALES SUPPORT service@cranesportsconnect.com 00800 52323000...
Page 52
Watertightness Situation Watertight to 5 bar* Bathing, Swimming Water sports *The specification of bar refers to the air overpressure used in connection with the watertight- ness test for the Smartwatch in accordance with DIN 8310. AFTER SALES SUPPORT 00800 52323000 service@cranesportsconnect.com...
Cleaning Cleaning NOTICE! Risk of damage! Improperly cleaning may lead to damage. − Do not use any aggressive cleaners, brushes with metal or nylon bristles, sharp or metallic cleaning utensils such as knives, hard scrapers and the like. They could damage the surfac- −...
Storage Storage − Before storage, clean the Smartwatch and charger thoroughly as described in the chapter “Cleaning”. − Always store the Smartwatch and charger in a dry area. − Protect the Smartwatch and charger against exposure to direct sunlight and other sources of heat.
Troubleshooting Troubleshooting Fault Solution The Smartwatch does not re- − Your smartphone or tablet does not support Blue- spond to entries made on the tooth® Smart Ready. Exchange your smartphone or smartphone or tablet. tablet with a model that supports Bluetooth® Smart Ready.
Page 56
Troubleshooting Fault Solution No connection is established be- − Do not connect the Smartwatch and Crane Connect tween the Smartwatch and your app via the Bluetooth® settings for your smartphone smartphone or tablet. or tablet. − Activate Bluetooth® before you open the Crane Connect app.
Page 57
Troubleshooting Fault Solution No connection is established be- − Switch off your smartphone or tablet and then back tween the Smartwatch and your smartphone or tablet. − Enable the visibility of your smartphone or tablet in the Bluetooth® menu. − Reinstall the Crane Connect app on your smartphone or tablet.
Declaration of conformity Declaration of conformity Krippl-Watches hereby declares that the analogue Smartwatch (model no. AE6-CDSM11A/11B) complies with the fundamental requirements and other applicable provisions of the R&TTE 1999/5/CE and RoHS 2011/65/EU directives. You can access the complete text for the declaration of conformity on our website: www.produktservice.info.
Technical data Technical data Model number: AE6-CDSM11A, AE6-CDSM11B Article number: 93735 EAN code: 20037284 Operating temperature: –10 °C bis +50 °C Storage temperature: –20 °C bis +70 °C Rechargeable battery: 1×3.7 V Li-polymer, 30 mAh, rechargeable AFTER SALES SUPPORT service@cranesportsconnect.com 00800 52323000...
PRODUCED IN CHINA FOR: ALDI STORES LTD. PO BOX 26, ATHERSTONE, Disposal WARWICKSHIRE CV9 2SH. ALDI STORES (IRELAND) LTD. 93735 Disposal PO BOX 726, NAAS, CO. KILDARE. Visit us at www.aldi.com 1313 Disposal of packaging Dispose of the packaging sorted according to type. Dispose of card- w ww.recyclenow.com...
Page 61
Disposal Waste equipment must not be disposed of together with domestic waste! This symbol indicates that disposing of this product together with domestic waste is prohibited under the directive on waste electrical and electronic equipment (2012/19/EU) and national laws. This product must be left with a collection point spe- cifically designated for this purpose.
Page 62
Disposal Batteries and rechargeable batteries must not be disposed of together with do- mestic waste! As a consumer you are required by law to leave any batteries, regardless of whether they contain hazardous material* or not, with a collection point in your community / your borough or return them to your retailer to be disposed of in an environmentally friendly manner.
WARRANTY CARD ANALOGUE SMARTWATCH Your details: Name: Address: E-mail: Date of purchase *: * We recommend you keep the receipt with this warranty card. Location of purchase:...
Page 64
Description of malfunction: AFTER SALES SUPPORT Return your completed warranty card together with the faulty product to: 00800 52323000 11/2016 GB IRE Krippl-Watches www.cranesportsconnect.com Freepost code: RLTU-ZYZE-SKLG Model: AE6-CDSM11A, AE6-CDSM11B Product Code: 93735 Piccadilly 180 Free hotline W1J 9HF London Call rates from mobile phones may vary.
Warranty conditions Dear Customer, The ALDI warranty offers you extensive benefits: Warranty period: 3 years from date of purchase. 6 months for wear parts and consumables under normal and proper conditions of use (e.g. rechargeable batteries). Costs: Free repair/exchange or refund.
Page 66
ADVICE: Please contact our service hotline by phone, e-mail or fax before sending in the device. This allows us to provide support in the event of possible operator errors. In order to make a claim under the warranty, please send us: •...
Page 67
The warranty does not cover damage caused by: • Accident or unanticipated events (e.g. lightning, water, fire). • Improper use or transport. • Disregard of the safety and maintenance instructions. • Other improper treatment or modification. After the expiry of the warranty period, you still have the possibility to have your product re- paired at your own expense.
Customer Service AFTER SALES SUPPORT 00800 52323000 service@cranesportsconnect.com...
Page 69
Great care has gone into the manufacture of PRODUCED IN CHINA FOR: this product and it should therefore provide ALDI STORES LTD. PO BOX 26, ATHERSTONE you with years of good service when used WARWICKSHIRE, CV9 2SH properly. In the event of product failure within its intended use over the course of the first 3 ALDI STORES (IRELAND) LTD.
Need help?
Do you have a question about the ANALOGUE SMARTWATCH and is the answer not in the manual?
Questions and answers