Audio Volume Settings; Setting A Password; Factory Reset; Applying Firmware Upgrades - IAdea XDS-151 User Manual

Audio volume settings

Setting a password

Factory reset

If you forget a system password you have set, you must reset the system to regain access to the player. System reset
will re-initialize the system, clear passwords, and return settings to their default values. Perform the following:
1. Connect USB keyboard
2. Reboot the player and look for the reset instructions on the top left (circled in screenshot below). When it
appears, press the Delete key on your keyboard
 If you missed the reset window, unplug power and try again
3. You should see a menu with a reset confirmation dialogue box. SELECT Yes to confirm
4. WAIT while system reboots to complete reset

Applying firmware upgrades

Firmware updates can be performed using a USB flash drive or via network, depending on management software used.
Please read the release notes carefully regarding the changes that will be made to your player before applying the
upgrade
1. Obtain the latest firmware and copy it to the root directory of a USB drive
2. Power on device and plug USB keyboard to the device to enter menu system
3. Follow on screen instructions and select firmware upgrade option in the menu
4. When instructed, plug in the USB drive to begin firmware upgrade
From the Main Menu, select Output setting to enter the
submenu.
(Set display brightness is not available in the XDS-151)
You can enter the sound level in percentage (%) from 0
(quietest) to 100 (loudest) or in decibels (db) from -22
(quietest) to 0 (loudest)
To prevent your player settings from being modified, set a player
password to hide the menus.
From the top level menu, select "Change password" to set a
password.
Once a password is set, you can only access the menus by
connecting a USB keyboard and pressing CONTROL + ALT + DELETE
(3-key combination) simultaneously. You may connect the
keyboard at any stage of player operation or before/ during boot-
up.
If you forget the password, you will need to reset the device. See
Factory reset.
5