Alcatel onetouch pixi pulsar 991A Quick Start Manual page 4

Installing and removing the microSD card
Place the microSD card with the chip facing downwards and slide it
into its housing. Make sure that it is correctly inserted. To remove the
card, press and slide it out.
To avoid data loss and microSD card damage, before
removing the microSD card, please ensure that the microSD
card is unmounted (Settings\SD card & Phone storage\
Unmount SD card).
Charging the battery
Connect the battery charger to your phone and outlet respectively.
To reduce power consumption and energy waste, when
battery is fully charged, disconnect your charger from
the plug; switch off Wi-Fi, GPS, Bluetooth or background-
running applications when not in use; reduce the backlight
time, etc.
6
IP4183_991A_991S_QG_Eng_USA_07_120611.indd 6-7 IP4183_991A_991S_QG_Eng_USA_07_120611.indd 6-7
1.2.2
Hold down the Power key until the phone powers on. It will take a
few seconds before the screen lights up.
Set up your phone for the first time
The first time you power on the phone, you are prompted to set
up your phone in multiple ways: language, input method, mobile data
connection, account setup and synchronization, system update, etc.
You are required to sign into your Google account to synchronize
email, contacts, calendar and other Google applications
• Enter your user name and password, then touch
forget your password, you can go to http://www.google.com/ to
retrieve it. If you don't own a Google Account, you are prompted
to create one by touching Create.
• Read the setup information on the screen
• Mark/Unmark the check box to choose whether you would like to
take advantage of Goggle's location service, then touch Next.
• Mark/Unmark the check box to choose whether you want to back
up data with your Google account, then touch Next.
• Touch
Standard charger
UK charger
In power on screen without SIM card inserted, you can also connect
to a Wi-Fi network to sign into your Google account and to use
some features.
1.2.3
Hold down the Power key until the phone options appear, select
Power off.
(1) Application availability depends on country and operator.
Power on your phone
Finish setup.
This initial set up can be skipped and enabled via
Settings\Accounts & sync.
Power off your phone
(1)
.
Sign in. If you
.
7
2012-6-11 16:37:02 2012-6-11 16:37:02