Advertisement
This is a representative photograph. The actual components
in your kit may appear slightly different.
This kit contains the following:
1 pair of ST-40, 4 piston calipers sized specifically for the Mercedes E-Class
1 set of high performance brake pads
1 pair of either 332 X 32mm rotors or 355 X 32mm rotors, mounted to anodized billet 7075-T6
aluminum hats, using floating drive pins and Inconel
1 pair of 6061-T6 aluminum caliper adapter brackets, with stainless steel mounting studs pre-
installed using thread locker.
4ea. 7/16-20 Jet Nuts
4ea. 12mm washers
1 pair of stainless steel covered Teflon brake lines
1 pair of Banjo Bolts
2 pair of copper washer
1 pair of rubber end caps
1 Caplet of Loctite 262
Mercedes E-Class Big Brake Kit
s
anti-rattle hardware
®
2
Advertisement
