Table of Contents
Advertisement
Follow the same steps in reverse order to reat-
tach the cover.
Be careful when installing the cover, oth-
erwise leaks could occur and cause dam-
age to the headlamp
system.<
Replacing the bulb
1.
Turn the lamp counterclockwise, arrow 1,
and remove it, arrow 2.
2.
Push on the catch, arrow 1, and unplug the
connector, arrow 2.
3.
To insert the new bulb and replace the
cover, proceed in reverse order.
116
Online Edition for Part no. 01 41 0 014 701 - © 11/07 BMW AG
Turn signal indicators, parking lamps,
roadside parking lamps and fog lamps
Accessing the lamps via the wheel well
1
Turn signal
2
Parking/roadside parking/fog lamps
Replacing a turn signal bulb
21 watt bulb, PY 21 W
1.
Turn in the wheel.
2.
Remove cover 1.
To do so, turn the cover counterclockwise.
3.
Remove the inside cover.
To do so, turn the cover counterclockwise.
4.
Screw out the bulb counterclockwise.
5.
To insert the new bulb and replace the cov-
ers, proceed in reverse order.
Hide quick links:
Advertisement
Table of Contents
