Suzuki Aerio Owner's Manual page 120

Folding Rear Seats: 3
OTHER CONTROLS AND EQUIPMENT
3) Lower the center head restraint fully
before folding the rear right seatback.
Refer to "Head Restraints" for details.
4) Hook the webbing of both outboard lap-
shoulder belt(s) in the belt hanger.
5-5
CAUTION
When you move a seatback, make
sure the belt webbing is hooked in
the belt hangers so the seat belts are
not caught by the seatback, seat
hinge, or seat latch. This helps pre-
vent damage to the belt system.
54G374
5) Pull up the knob on the top of each split
seat and fold the seatback forward.
To raise the rear seatback(s):
1) Lift the seatback up and push back until
it locks into place.
WARNING
54G288
When returning a rear seatback to the
normal position, make sure the seat-
back is securely latched.
2) Pull the belt out from the holder and
insert the connector latch plate into the
connector so as to align the triangle
marks until you hear a "click".
WARNING
Make sure the detachable connector
is securely latched and the webbing
54G381
is not twisted.
WARNING
If you park your vehicle outdoors in
direct sunlight or in hot weather, an
exposed latch plate can get hot
enough to burn you. Be careful not to
touch a hot latch plate.
54G375
54G27-03E