Connecting External Audio Sources Via Bluetooth; Tions - Volkswagen RNS 310 User Manual

Navigationssystem_111.5U6.N31_23.book Seite 26 Donnerstag, 22. April 2010 5:16 17

Connecting external audio sources via Bluetooth

Fig. 24 Bluetooth audio mode.
Please first read and observe the safety in-
structions on page 3 and the introduc-
tory information and safety instructions
page 21.
Bluetooth audio mode is only possible in vehicles
equipped with a factory-installed mobile phone
package that supports this function. To operate a
mobile telephone package, please refer to the
user's manual of the mobile telephone package in-
stalled in your vehicle.
In Bluetooth audio mode, audio files that are
played through an audio source connected via
®
Bluetooth can be played through the vehicle
speakers. The external audio source must support
the A2DP Bluetooth profile.
The external audio source connected via Blue-
®
cannot be controlled through the radio
tooth
navigation system.
Starting Bluetooth audio transmission
•
Pair or connect the external audio source fol-
lowing the instructions in the vehicle owner's
manual via the Bluetooth interface of the mobile
phone package.
•
Reduce playback volume on the radio naviga-
tion system ⇒ page 8.
•
Start playback on the external Bluetooth audio
source.
Some devices allow Bluetooth audio playback to
be started directly through the Media selection
menu⇒ page 26.
RNS 310: Activating Bluetooth audio
Some devices only require a one-time activation of
Bluetooth audio playback:
RNS 310, RNS 315
®
Fig. 25 Media selection menu with BT audio tagged.
•
After the initial start-up of a Bluetooth audio
transmission, a pop-up window opens.
•
on
Request for confirmation of Bluetooth audio
playback.
•
The display switches into Bluetooth audio
mode ⇒
fig. 24 and the checkbox in the
function button in the Media Setup
Activate BT audio
menu is automatically activated ⇒ page 30.
The checkbox in the
button is deactivated in the factory settings.
If the
Activate BT audio
Media Settings menu is activated, the Media selec-
tion menu will be launched when Bluetooth audio
transmission has been started ⇒ page 26.
Starting Bluetooth audio playback
•
Press the
MEDIA
menu to open the Media selection menu.
•
Select the Bluetooth function button, as de-

scribed ⇒ page 27.
Bluetooth audio mode is indicated on the screen
by BT audio or 
.
When the playback of the external audio source is
finished, the radio navigation system remains in
the Bluetooth audio menu ⇒
audio source must be selected manually
⇒ page 27.
The volume should be adjusted to match the
volume of the other audio sources
⇒ page 30.
On a connected Bluetooth audio source, all
warning and service tones, such as touch
tones on a mobile phone, should be switched off to
avoid interference and malfunctions.
function
 Activate BT audio
function button in the
button in the MEDIA main
fig. 24. A different