Tions - Volkswagen RNS 310 User Manual

Navigationssystem_111.5U6.N31_23.book Seite 18 Donnerstag, 22. April 2010 5:16 17
Changing Sirius stations
Fig. 15 Station selection options.
Please first read and observe the safety in-
structions on page 3 and the introduc-
tory information on page 12.
Changing stations using the arrow buttons
•
Press one of the arrow buttons on the device
⇒ page 6,
fig. 1 A to switch to the next station in
3
the selected category.

If is displayed, only the stations saved on the
station preset buttons are browsed through
⇒ page 15.
Configuring station selection options
•
Press the function button in the Satel-
Options
lite radio main menu ⇒
fig. 15.
•
Activate the function button in the
 Presets
pop-up window to show the station buttons in the
Satellite radio main menu ⇒ page 15.
•
OR: Activate the checkbox in the
tion button to browse through the channels using
the tuning knob ⇒ page 6,
fig. 1
•
OR: Activate the checkbox in the
function button to open the station list view with
the tuning knob and open stations there.
Selecting satellite stations from the station list
All the activated stations in the chosen category
are displayed in the station list.
RNS 310, RNS 315
Fig. 16 Station list in the selected category.
•
Turn the tuning knob to open the list of avail-
able satellite stations in the selected category
⇒
fig. 16.
•
Change category if required ⇒ page 19.
•
Browse list and launch the desired station by
turning the tuning knob to select, then pressing it
⇒ page 8.
•
Press the
the station list.
The list will close automatically after a a period of
inactivity.
SCAN
•
Press the
lite radio main menu ⇒
•
Press the
window.
func-
 Tune
The
Options
stations are played for about 5 seconds each.
A .
10
•
Press the
 Channel List
station scanning at the current station.
Scanning will also be stopped if a station is se-
lected manually using the arrow or station
buttons.
⇒ page 6,
fig. 1 A button to close
 8
function button in the Satel-
Options
fig. 15.
function button in the pop-up
Scan
function button switches to
function button in order to stop
Scan
. All
Scan