AEG LAVAMAT 69480FL User Manual page 15

• The door is locked.
• The appliance starts the
countdown.
• When the countdown is
completed, the programme starts
automatically.
You can cancel or change
the set of the Finish In
option before you touch the
button Start/Pause . After
touching the button Start/
Pause you can only cancel
the Finish In option.
To cancel the Finish In option:
a. Touch the button Start/Pause to
set the appliance to pause. The
indicator of button Start/Pause
flashes.
b. Touch the button Finish In until
the indicator above this button
goes off.
Touch the button Start/Pause
again to start the programme
immediately.
10.9 Interrupting a
programme and changing the
options
You can change only some options
before they operate.
1. Touch Start/Pause .
The indicator of this button flashes.
2. Change the options. If you change
any option the Finish In option (if set)
will be disabled.
3. Touch Start/Pause again.
The programme continues.
10.10 Cancelling a running
programme
1. Press the button On/Off for some
seconds to cancel the programme
and to deactivate the appliance.
2. Press the same button again to
activate the appliance. Now, you can
set a new washing programme.
Before starting the new
programme the appliance
could drain the water. In this
case, make sure that the
detergent is still in the
detergent compartment, if
not fill the detergent again.
10.11 Opening the door
While a programme (or the Finish In)
operates, the appliance door is locked.
The indicator is on.
CAUTION!
If the temperature and level
of the water in the drum are
too high, you cannot open
the door.
To open the door during the first
minutes of the cycle (or when the
Finish In operates) :
1. Touch the button Start/Pause to
pause the appliance.
2. Wait until the indicator
3. You can open the door.
4. Close the door and touch the button
Start/Pause again. The programme
(or the Finish In) continues.
10.12 AUTO-OFF option
The AUTO-OFF stand-by option
automatically deactivates the appliance
to decrease the energy consumption. All
the indicators and the display go off
when :
• You do not use the appliance for 5
minutes before you touch the Start/
Pause.
Press the button On/Off to activate
the appliance again.
• After 5 minutes from the end of the
washing programme.
Press the button On/Off to activate
the appliance again.
The display shows the end of the last
set programme.
Touch the button Programmes if you
want to set a new cycle.
ENGLISH 15
goes off.