Escort iMiniPlus PDF User Manual page 7

Statistics
Statistics part includes:
Highest temperature reading for the current trip

Average temperature reading for the current trip.

Please note: if the logger is configured for continuous logging, logger memory is getting overwritten and logger
only holds the last 8048 readings. Logger computes average that includes all readings even the ones already
overwritten. Console Pro computes average based on readings retrieved from logger memory and result may
be different.
Lowest temperature reading for the current trip

High Alarm status

Low Alarm status

Both High and Low Alarm can have the following status:

Disabled – Alarm was not enabled when logger was programmed
o
Activated – Alarm has been programmed and triggered
o
Not activated – Alarm was programmed but has not been triggered
o
Record
The picture below is an example of a graph section in a report of the logging trip with High Alarm set to 22 °C Low
Alarm set to 20 °C and Catastrophe Alarms disabled. Note that only two coloured dashed lines are displayed for
primary alarm limits.
iMiniPlus PDF Logger User Guide v2.0
- 7 -