Cooker Hood Installation - Beef Eater BS27300 Assembly And Operating Instructions Manual

COOKER HOOD INSTALLATION

1.
Using a spirit level mark a vertical centre line on the
wall where the cooker hood is to be positioned, and a
horizontal line at the hood base position.
NOTE: See table below for the minimum and maximum
height of the underside of cooker hood.
COOKER TYPE MINIMUM HEIGHT*
Electric hob 600 mm
Gas hob 650 mm
Gas BBQ
1200mm
open grill**
* If the instructions of the hob specify a greater distance
than the minimum above, then that shall be the minimum
height for installation.
** Installation height as specified in AS/NZS 5601
clause 6.10.1.7
WARNING!
Failure to install the screws or fixing device
in accordance with these instructions may
result in electrical hazards.
6
COOKER HOOD INSTALLATION
2.
Mark the location for the wall mounting points and
the flue cover mounting bracket.
3. Install suitable screws for cooker hood mounting
bracket (screws and wall plugs provided are suitable for
attachment to masonry structure for other structures
use suitable screws/plugs to support a total weight of
MAXIMUM HEIGHT* 50kg).
1200mm
Attach the flue cover mounting bracket to the wall and/
or ceiling.
1200mm
1200mm
wall
7.5mm
373mm
343mm
installation
height
ceiling fixing
330mm
40mm
ceiling/bulkhead
300mm
wall fixing
1079mm Max
760mm Min
130mm
underside of
hood
centreline of
cooker
top of cooker
surface