Connections - Acoustic Preference GRACIOSO 1.0 ST (STANDARD) Owner's Manual

MANUALS GRACIOSO 1.0 ST

5. CONNECTIONS

Turn off all audio system power before making any connections. Use high-quality loudspeaker cables. The
length and type of speaker cable used for your system will have an audible effect. Make all connections
observing the proper polarity, positive-to-positive (+) and negative-to-negative (–). Most speaker cables are
marked so that it is possible to distinguish between conductors by the color of the insulation or by a white
stripe or small raised edge along one conductor. Correct phasing of the speakers is vital for sound quality.
Connecting your Gracioso loudspeakers
1. Connect one pair of loudspeaker wires to the input connectors. Then connect the same pair of
loudspeaker wires to the desired power amplifier output channel.
2. Repeat step 1 to connect the second loudspeaker to a separate power amplifier output channel.
Figure 5: Connection with single stereo amplifier
Page 7 | 12