Handling - Acoustic Preference GRACIOSO 1.0 ST (STANDARD) Owner's Manual

Mid-bass section (Special high grade from MOREL)

Dimension 160mm (6.3")

Transient Power 10ms 1000W

Nominal Power Handling (DIN) P 150W

Uniflow™ Aluminum diecast chassis

Hybrid™ Neodymium/Ferrite magnet system

Titanium coil bobbin

3" Large Hexatech™ Aluminum voice coil

High power handling

Cone Material Injected Damped Polymer Composite

High Xmax, Low Qts, Low Fs, High QM
Tweeter (Special high grade from SCANSPEAK)

26 mm (1") Ring Dome Diaphragm

Patented Symmetrical Drive (SD-2) motor

Diffraction Damping Rubber Front

Patented Phase Plug Design

AirCirc Motor Design w. 6 Neo magnets

Die Cast Rubber Painted Alu Face Plate Note
Crossover

12 dB/oct/LKR/2800 Hz crossover

Mundorf Air Foil Coils, 99.99% pure OFC copper with Polypropylene insulation.

Mundorf High-End Audio Grade MKP capacitors.

High quality Rhodium Bi-wire terminals

Point-to-point construction with UP-OCC Cupper/teflon internal wiring

Circuit boards base from hard wood plates in suitable thickness

3. HANDLING

After removing the external covering of packing, grasp the straps to lift the loudspeaker out of the packing
box. Follow all the enclosed instructions for setting up the loudspeakers.
Figure 1: After removing the external covering of packing, grasp the straps to lift the loudspeaker out of the wooden crates.
MANUALS GRACIOSO 1.0 ST
Page 4 | 12