Sanyo MCD-Z7F Instruction Manual page 3

I
POWER SUPPLY
I
~
II
.—. —— .
3
——.——
Battery power operation
I
AC power operation
.—— .—— — .—. ——
Install batteries.
Take out the cord and
Observe + and – signs. connect it.
.+/.. ,""" -
& /<./
/"
8 '"D'" size batteries
Replace lid.
AC
INPUT
- 24t)v,
NOTE:
When the mains Ieacl is connrxtcd 10 llIe
unit, the installed batteries will be autunlali -
cally disconnected.
The FUNCTION switch is mounted on the
secondary sicte. The unit is not fliscoi~ncctc~l
frotm mains. even switched off
CAUTION:
WHEN INSTALLING THE BATTERIES
To prevent leakage from the batteries, which 4.
is corrosive and can cause personal injury
and damage totheunit, observe the following
prccaulions: 5.
1. The batteries must be installed correctly.
Match the polarities (+ and – signs) on 6.
the batteries, to the polarities shown on
Ifthc unit will notbe uscdforancxtcndc(l
period of time, remove the batteries an[l
store thcm in a cool place.
Carefully follow the battery manu[acturw's
instructions for proper use and disposal.
DO NOT ALLOW YOUNG CHILDREN 1"0
HANDLE BATTERIES.
the back of the unit.
NOTE:
2. Donotmix new batteries with oldorused
When the batteries have bccorne
batteries.
discharged, thcymust bcdisposedofirla
3. Only usc batteries of the same type and safe manner which complies with all
brancl. applicable laws.