Sd Card - Garmin GTN 6 series Maintenance Manual

6.3 SD Card

CAUTION
Handle the SD cards carefully. Do not touch the connector edge of the SD card.
To replace the data card, complete the following steps:
1. Ensure that the GTN is turned off.
2. Remove the data card by pressing the card until it disengages and then pull the SD card to extract
from the unit.
With the label facing right, insert the new SD card by pushing the card straight into the slot and press until
it is fully inserted.
190-01007-A1
Rev. 6
System Maintenance Manual GTN 6XX/7XX Part 23 AML STC
Page 6-7