Table of Contents
Advertisement
SECTION 4 – FINAL FITTING
Ensure all mounting bolts are tightened, in particular the grub screw in the Height
Adjustment Block.
Check the operation of the Dynamic Footrest Assembly, it should move freely on
the footrest drop tubes and return to its rest position when no force is being
applied to it. Please contact us if required.
SECTION 5 – REVIEW AND MAINTENANCE
We recommend that the red seat restraining strap is fastened around the back of
the remaining seat frame as a secondary safety device, and that the armrests are
also used.
The dynamic footrest should be checked every 8 weeks initially, and then no less
frequently than every 6 months.
If you are unsure about any part of these instructions, please contact us.
Active Design Ltd
68K Wyrley Road
Birmingham
Tel:
Fax: (0121) 327 8807
E-mail:
technical@activedesign.co.uk
Web: www.activedesign.co.uk
B6 7BN
(0121) 326 7506
9
INS122-1 October 2009
Advertisement
Table of Contents
