Easy Setup And Adjustment; Other Features - Sony PVM-L2300 Manual

Easy setup and adjustment

Auto white balance
The colour temperature and white
balance of the PVM-L2300 monitor
can be automatically adjusted by the
Auto White Balance function using the
specifi ed colour temperature probes
such as the Konica Minolta CA-210,
DK-Technologies PM5639/06, and X-Rite
i1 (Eye-One) Pro.
1 A connector is required for each colour analyzer.
Auto Chroma/Phase
Adjustment
2
An Auto Chroma/Phase/Matrix setup
function is provided on the PVM-L2300,
which automatically adjusts the monitor's
chroma, phase, and matrix using external
colour bars.
2 Supports analog signal input only.
Internal Test Signal and
SMPTE Colour
The PVM-L2300 incorporates a built-
in test signal generator for: 100%
white signal, 20% gray signal, 0%
black signal, PLUGE (Picture Line Up
Generating Equipment) signal, colour-
bar signals, 5-step grayscale signal, and
ramp signal.

Other Features

> VESA Mounting (200 x 100 mm pitch)
TM
> Blue Only
> Mono
> H Delay/V Delay
> NTSC Setup Level (0%, 7.5%)
> Component Level (SMPTE/EBU-N10 or
Betacam)
> Aperture
> Serial Remote (Ethernet)
> Parallel Remote (D-sub 9-pin)
> Tally Lamp (Amber)
> EXT Sync (for RGB/YUV)
> Remote Maintenance
"Character Off" Button
(BKM-16R)
To facilitate manual adjustments, the
On-Screen Menu indication can be
taken off the screen, while the Menu
,
1 mode is still active. The On-Screen
Menu indication can be toggled on or
off simply by the press of a button on
the BKM-16R's front panel.
Colour Temperature
Selection
The Colour Temperature can be
selected from D65, D93, or User1
to User5. A "Colour Temp" (Colour
Temperature) button located on the
BKM-16R's front panel enables instant
access to the "Colour Temp menu"
without using the On-Screen menu.
Aspect Switch
The aspect ratio of the PVM-L2300 can
be switched between 4:3 and 16:9
depending on the input signal.
PVM-L2300 with the BKM-38H Controller Attachment Stand
15