Service Menu Settings; Display Menu - Toshiba 27WLT56B Service Manual

14. SERVICE MENU SETTINGS

All system, geometry and white balance alignments are performed in production service mode. Before
starting the production mode alignments, make sure that all manual adjustments are done correctly. To
start production mode alignments enter the MENU by pressing "MENU" button and then press the digits
4, 7, 2 and 5 respectively. The following menu appears on the screen.
display
blank color
black
panel
power on time
backlight on time
Vestel V1.0.10 Release Build
scart prescale
nicam prescale
down to change display settings
There are 4 submenus in service menu. These are display, calibration, deinterlacer and factory
settings menus. Press "◄/►" buttons to select a menu title and then "▲/▼" buttons to select a menu
item and "◄/►" or "OK" buttons to set the menu item to the desired option. To exit the service menu
press "MENU" button.
Entire service menu parameters of Plasma TV are listed below.
14.1.

display menu

By pressing "◄/►" buttons select the first icon. display menu appears on the screen.
display
blank color
black
panel
power on time
backlight on time
Vestel V1.0.10 Release Build
scart prescale
nicam prescale
down to change display settings
blank color
By pressing / button, select blank color. Press
black, red, green and blue.
panel
Displays panel resolution.
power on time
Displays total working time of the set.
backlight on time
Displays total backlight on time of the set. (Not used for plasma displays)
27" TFT TV Service Manual
green blue
red
: 23 30
: 23 30
25
32
green blue
red
: 23 30
: 23 30
25
32
58
/ button to set the blank color. The options are:
05/09/2005