Brookstone FLIGHTFORCE User Manual page 12

4 . Slide the ON/OFF SLIDE SWITCH on the controller to
the ON position . The controller will vibrate .
5 . Push the THROTTLE CONTROL STICK all the way up . A
beep will sound .
6 . Push the THROTTLE CONTROL STICK all the way
down . A beep will sound and the FRONT AND REAR
LED INDICATORS will change to solid indicating the
controller and the Battling Drone are successfully synced
If not, repeat above steps .
FOR MULTI-PERSON PLAY
7 . Before starting, make sure that the power on the
controller is OFF and the battery has been removed from
the Battling Drone . Make sure that there are no other
2 . 4 Ghz devices in the area .
8 . Each person needs to sync their Battling Drone at a
different time to avoid interference . Follow steps 1 to 6
above ensuring that no one else is syncing at the same
time .
9 . After syncing, each player's Battling Drone should be
20
left ON until all players have synced their Battling
Drones .
10 . Should there be interference, all players must turn off
their controllers and Battling Drone for up to 60
seconds and then begin the syncing process again .
21