Panasonic SA-HT440P Service Manual page 23

Item
Mode Name Description
Micro-processor Micro-processor firmware version
display & EEPROM checksum display.
firmware version
display &
EEPROM
checksum
display.
Initialization
Initialization
User settings are cancelled and player
is initialized to factory setting.
Region display
Region display & mode
DVD module firmware version is
DVD
displayed on the FL Display.
module
firmware
version display
Communication Displays frequency of communication
error display errors between system control IC and
mechanism control IC during DVD
module.
DVD Module To reset DVD Module. (After
Reset initialisation) Refer to Section 9.5.3 for
more information.
FL Display
Panel
controller
jumper
information
N: NTSC / 6: PAL60
N: noPAL / P: PAL
Region No.
System
controller
version
Destination
System controller
generation
Region
23
SA-HT440P / SA-HT440PC
Key Operation
Front Key
In STOP (no disc)
mode, press STOP button
on the player, and "7"
button on the remote
control unit.
Cancelled automatically
5 seconds later.
Press "FL Display" button on
remote control unit for next
page. (FL Display)
In STOP (no disc)
mode, press STOP button
on the player , and 10
button on the remote
control unit.
In STOP (no disc)
mode, press STOP button
on the player, and "6"
button on the remote
control unit.
Cancelled automatically
5 seconds later.
In STOP (no disc)
mode, press STOP button
on the player, and "8"
button on the remote
control unit.
Cancelled automatically
5 seconds later.
In STOP (no disc)
mode, press STOP button
on the player, and "MENU"
button on the remote
control unit.
Cancelled automatically
5 seconds later.
While in initialization
mode, press and hold
STOP button on player
follow by "ENTER" button
on remote control unit.
Cancelled automatically
5 seconds later.