Efco IP1210S Operators Instruction Book page 20

parts must be carried out by a Skilled Technician who is also a Qualified Eletrician, i.e. a person with
professional training who is authorised to check, install and repair electrical equipment correctly and
according to current regulations in the country where the water cleaner is installed.
• Total Stop: this stops operation of the water cleaner every time the control lever on the cleaner gun is
released.
• Easy Start: this aids starting up the water cleaner by lowering the pressure for the first moments of its
operation.
2 FEATURES AND TECHNICAL SPECIFICATIONS
ELECTRICAL CONNECTION
Mains power supply
Absorbed power
Fuse
HYDRAULIC CONNECTION
Maximum inlet water temperature
Minimum inlet water temperature
Minimum inlet water flow
Maximum inlet water pressure
Maximum priming depth
PERFORMANCE
Water flow
Maximum pressure
Recoil of cleaner gun
Sound level
Operator arm vibrations
WEIGHT AND DIMENSION
Lenght x width x height
Weight
Detergent bottle capacity
All features and technical specifications are only indications. The Manufacturer reserves the right to modify the appliance as it deems necessary.
2.1 Identification of Components
Please also refer to figures 1 to 4, which are located at the start of these operating and maintenance
instructions.
1 Electric power cord
2 Main switch
3 Handling bar
4 Housing for water gun / lance hose
5 Warning notice
6 Hose reel
7 Identification plate
8 Water outlet connector
9 Housing for foaming lance
10 Lifting handle
11 Securfix ring nut
12 Water inlet quick-fit connector
13 Housing for electric power cord
20
14 Water gun
PW 121C
IP 1210S
1,7 kW
450 l/h / 120 US gph
360 l/h / 95 US gph
13 MPa / 130 bars / 1885 psi 14 MPa / 140 bars / 2031 psi 15 MPa / 150 bars / 2175 psi
16 N
0,73 m/s²
310 x 308 x 820 mm / 12 x 12 x 32 in
12 kg / 26 lb
17 Nozzle cleaning pin
18 Rotojet rotating nozzle head (PW 136C - PW 145C -
IP 1360S - IP 1450S only)
19 Foaming lance
20 Detergent intake adjuster
21 Opening for detergent
22 Water brush (PW 136C - PW 145C IP 1360S - IP 1450S only)
23 High pressure hose
24 Quick fit connector for high-pressure hose
25 Safety catch on water gun lever
26 Water gun lever
27 Nozzle support head
28 Lance hose
PW 136C
IP 1360S
230 V / 1~50 Hz
2,0 kW
16 A
50 °C / 122 °F
5 °C / 41 °F
500 l/h / 132 US gph
0,8 MPa / 8 bar / 116 psi
0 m / 0 ft
410 l/h / 108 US gph
19 N
93 dB (A)
1,31 m/s²
13 kg / 29 lb
0,35 l / 0,09 US gal
PW 145C
IP 1450S
2,3 kW
560 l/h / 148 US gph
480 l/h / 127 US gph
23 N
1,7 m/s²
14 kg / 31 lb