Security; Pin1 Check; Change Pin1; Phone Lock - Pantech C3 5U010344000REV00 User Manual

Settings

Security

The security settings enable you to restrict the use of your
phone to specific people and types of calls.
Codes and passwords are used to protect these features of
your phone.
They are described in the following sections. See also
2.Access codes in the Appendix, on page 84.
The security settings enable you to restrict the use of your
phone to specific people and types of calls.
Your phone's security features keep your phone and SIM
card safe from unauthorized use. You can either set a
password for your phone or use the Call Barring service
and Fixed Dialing mode to restrict which calls can be made
using your phone.
Press the [Menu] Soft key, select 9.Settings, and then select
5.Security.

PIN1 Check

Press the scroll [l/r] key and [o] key for setup.
If you input the incorrect PIN1 code three consecutive
times, you will be prompted to input the PUK1 number. The
default is Disabled.
• Enabled: Input PIN1 whenever the power is turned on.
78
• Disabled: Does not input PIN1 whenever the power is
turned on.

Change PIN1

Change the PIN1 number.
You can change the PIN1 number only when the phone is
set for PIN1 Enable.

Phone Lock

This function allows you to lock your phone until the correct
password is input.
Press the [o] key after you type the password.

Change Password

This function allows you to change your phone's password.
The default password is 1234.

Phone Barring

This function offers multiple methods to limit incoming or
outgoing calls. In general, the barring service becomes
activated by interoperating with the network, but phone
barring is made by the phone itself. Major functions are as
follows.
• Incoming: Limits all incoming calls.
•On: Sets up all incoming calls barring.