Sony CDX-C660 Operating Instructions Manual page 8

Adding tracks to a program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D
SUR EQ
PLAY MODE
"P 1 " shows Program 1 is selected.
To select Program 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track slot number where you want to
insert a track.
C D
SUR EQ
PLAY MODE
3
Press either side of (SEEK/AMS) to select
the track you want to insert.
EN
4
Press (5) (ENTER) momentarily to enter
the track.
The current track in that slot number and
the succeeding tracks shift down.
5
To continue inserting tracks, repeat steps
2 through 4.
Note
Once all 12 slots have been filled, "*Mem Full*"
appears in the display, and you cannot insert tracks.
6
When you finish inserting tracks, press
(3) (PLAY MODE) for two seconds.
7
Press (SHIFT).
8
TRACK
4 P1.‚3
ENTER
Track slot number
TRACK
2 P1.‚2
ENTER
Erasing tracks in a program
1
Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
C D
TRACK
7 P1.‚8
SUR EQ
PLAY MODE ENTER
"P 1" shows Program 1 is selected.
To select Program 2, press (4) (n)
repeatedly until "P 2" appears.
2
Press (1) (N) or (4) (n) to select the
track you want to erase.
Track slot number
C D
TRACK
3 P1.‚6
SUR EQ
PLAY MODE ENTER
The track currently registered in slot 6 of
Program 1.
3
Press (5) (ENTER) for two seconds.
When you erase a track from a slot number,
the succeeding tracks shift up to fill the gap.
D E L
DISC TRACK
- -- P1.‚6
SUR EQ
PLAY MODE ENTER
µ
C D
TRACK
7 P1.‚6
SUR EQ
PLAY MODE ENTER
4
To continue erasing tracks, repeat steps
2 and 3.
5
When you finish erasing tracks, press (3)
(PLAY MODE) for two seconds.
6
Press (SHIFT).