3. Release the green lever of the cassette to cover the cleaning material. 4. Repeat steps 1, 2 and 3 to ensure that any contamination is removed. *MTP is a registered trademark of US Conec Ltd. For Technical Support: www.panduit.com/resources/install_maintain.asp INSTALLATION INSTRUCTIONS PN433 SAFETY PRECAUTIONS Page 2 of 4...
Page 3
7. Clean the external connector as described in the sections above. 8. Reinstall the external connector into the Q Cassette MTP* adapter. *MTP is a registered trademark of US Conec Ltd. For Technical Support: www.panduit.com/resources/install_maintain.asp INSTALLATION INSTRUCTIONS PN433 UICK Cassette MTP* Cleaning MTP* adapter with the...
Page 4
8. Depress the green lever a few times and verify that the cleaning tape is advancing properly. *MTP is a registered trademark of US Conec Ltd. For Instructions in Local Languages and Technical Support: www.panduit.com/resources/install_maintain.asp INSTALLATION INSTRUCTIONS PN433 3. Open and remove the cover using the finger grip on the side of the tool.